4g61t.org

Specializing in the 3g CSM
It is currently Mon Oct 27, 2025 3:59 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: I've got problems
PostPosted: Sat Mar 08, 2003 12:29 pm 
Offline
Some call me a god

Joined: Sun Nov 03, 2002 8:01 pm
Posts: 1111
Location: Sask. Canada
My car is losing anti-freeze, every time i check it i have to add about .5 to 1 litre. Compression test shows #1 @135, #2 @115, #3 @125, #4 @125. Hydrocarbon test showed no hydrcarbons in the antifreeze. We put some dye in it, when we put a UV light on the car where ever it is leaking should glow, the only thing glowing was the hose from the overflow jug to the ground.The engine oil does not move at all and it changes color normally. New thermostat, new 12 PSI rad cap, lower rad hose, in-line heater(no block heater). The turbo only puts out 10.2 PSI in all gears at any speed. Do the turbos have antifreeze going through them, could it be going out the turbo into the exhaust system, if so that might explain why my turbo only puts out 10.2 PSI.


Top
   
 Post subject:
PostPosted: Sat Mar 08, 2003 2:39 pm 
Offline
CSM Expert
User avatar

Joined: Sat Nov 03, 2001 7:00 pm
Posts: 2187
Blown headgasket


Top
   
 Post subject:
PostPosted: Sun Mar 09, 2003 8:59 pm 
Offline
CSM Expert
User avatar

Joined: Sun Jan 06, 2002 7:00 pm
Posts: 1792
Location: Perth, Australia
Ditto that - blown HG. Under compression the HG might still be sealing itself and is only sucking in coolant under high manifold vacuum which would explain the loss of coolant but lack of HC content. You would be burning oil from the turbo before any coolant could escape so I think it is probably fine.


Top
   
 Post subject:
PostPosted: Sat Apr 05, 2003 1:53 pm 
Offline
Some call me a god

Joined: Sun Nov 03, 2002 8:01 pm
Posts: 1111
Location: Sask. Canada
I put on about 5,000kms but I took a 13 hour road trip, and notice since then the antifreeze is haveing alot of small bubbles, allmost foaming. So now I actually have some kind of proof of the head gasket is gone. Bet you that when i do a HC test now there will be lots. Going to try and get it fixed.


Top
   
 Post subject:
PostPosted: Fri Apr 18, 2003 10:17 am 
Offline
Some call me a god

Joined: Sun Nov 03, 2002 8:01 pm
Posts: 1111
Location: Sask. Canada
Head gasket was fine. Head was warped five thou. All better now.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited