4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 2:20 pm

All times are UTC-05:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: 4g61t
PostPosted: Fri Mar 17, 2017 7:45 pm 
Offline
Member

Joined: Tue Feb 25, 2014 11:28 pm
Posts: 144
Location: San Jose Costa Rica
WTB ORIGINALS CAMSHAFTS OF 4G61T


Top
   
 Post subject: Re: 4g61t
PostPosted: Sat Mar 18, 2017 8:38 am 
Offline
The Silent Administrator
User avatar

Joined: Wed Dec 24, 2003 3:32 pm
Posts: 9524
Location: Ottawa, ON, Canada
Curiosity. Why stock 4g61t camshafts? Do you have non stock camshafts installed in a 4g61 motor right now?


Top
   
 Post subject: Re: 4g61t
PostPosted: Sun Mar 19, 2017 6:00 pm 
Offline
Member

Joined: Tue Feb 25, 2014 11:28 pm
Posts: 144
Location: San Jose Costa Rica
Nop


Top
   
 Post subject: Re: 4g61t
PostPosted: Fri Mar 24, 2017 1:04 am 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Tue Aug 23, 2011 4:20 am
Posts: 316
Location: Turlock, California
I know it's a long shot, but are the elantra 1.6 cams the same?

_________________
Abe


Top
   
 Post subject: Re: 4g61t
PostPosted: Fri Mar 24, 2017 6:31 am 
Offline
The Silent Administrator
User avatar

Joined: Wed Dec 24, 2003 3:32 pm
Posts: 9524
Location: Ottawa, ON, Canada
Probably not due to NA and turbo cams having different profiles/overlap/event duration.

Some have experimented with NA cams in turbo motors, but still best to install turbo cams.

The OP could install 1g stock turbo cams, with no problems. I ran them with corresponding 1G MAF, 1G ECU (1990 direct fit, preferred 1991-94 but wires to CAS and TPS need a jumper harness) and 450 injectors, and you could install a Walbro 190 (with suggested AFPR) or 1G stock fuel pump with matching FPR for the ECU type and have lots more power and throttle response. Also highly suggested to install a 1990-94 TB (90 requires no wiring changes), and you could install LiNk V2-3, if you wanted to check tune but always suggested to install a new knock sensor and put in a wideband 02.


Top
   
 Post subject: Re: 4g61t
PostPosted: Thu Mar 30, 2017 6:02 pm 
Offline
Restricted Newbie

Joined: Thu Mar 30, 2017 5:18 pm
Posts: 1
I really recommend doing a salvage yard search. Try car-part.com to do a search. Ive had some good luck with them. Hope this helps!


Top
   
 Post subject: Re: 4g61t
PostPosted: Fri Mar 31, 2017 6:54 am 
Offline
CSM Junkie
User avatar

Joined: Sat Sep 22, 2012 6:40 pm
Posts: 667
Location: Indianapolis, IN
http://www.usedpartx.com/usedparts-stor ... parts.html

_________________
Thom
1991 GVR4 1025/2000 (PTE 1200's, 16g, DSMLink v3, gm-maf, eagle/ross, .020 over, 272's, EVO VIII Wheels)
1992 GVR4 866/1000 (getting everything from above)


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited