4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 3:09 pm

All times are UTC-05:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sat Nov 02, 2013 6:15 pm 
Offline
Member

Joined: Mon Jul 20, 2009 2:57 pm
Posts: 98
Location: Golden, CO
Hello everyone,

I have been attempting to relocate the alternator on my car with minimal success.

I machined the Jay Racing bracket so I could bolt up the CSM turbo axle.

Image

I am still running into an interferrence issue when I attempted to bolt up the alternator, it interfers with the axle bracket.

Image

Can anybody help me out with how they solved this one? Grind the ear of the alternator down or grind the axle bracket down, or both?

Thanks,

Ben

FYI. Car is a '89 original turbo, with the OEM drivers side axle.

_________________
1989 Mirage Turbo - 11.7@119


Top
   
PostPosted: Sat Nov 02, 2013 7:58 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
I wouldnt touch the axle at all for grinding something down.. theres not a whole lot there to begin with..


is there any way you can oblong out the 2 mounting holes slightly to rais the bracket up 1/8"? that might cure the issue..



Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
PostPosted: Sun Nov 03, 2013 5:21 am 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Sun Apr 20, 2008 1:00 am
Posts: 375
Location: Tacoma, WA
I run this on my Colt. You have two choices. Find an awd 1g intermediate shaft and press the bearing/bracket off of it and use on your CSM shaft. The ears on the bracket face the other direction and are not a problem, the Jay Racing kit is actually made for that bracket so it's a direct bolt on then. Or the second choice is to cut off the second hole and ear on the CSM axle bracket and use the one hole to mount it.

_________________
'89 Colt GT w/bigger than stock turbo
'91 Talon AWD w/bigger than stock turbo
'05 Dodge diesel w/bigger than stock turbo


Top
   
PostPosted: Mon Nov 04, 2013 9:41 am 
Offline
Member

Joined: Mon Jul 20, 2009 2:57 pm
Posts: 98
Location: Golden, CO
I think I will TIG some "ears" on the bracket to raise the mounting point up 1/4". That should move the alternator up and away from the mounting ear for the axle bracket. Will post pics when completed.

Ben

_________________
1989 Mirage Turbo - 11.7@119


Top
   
PostPosted: Sat Nov 09, 2013 6:17 pm 
Offline
Some call me a god

Joined: Thu May 05, 2005 2:31 am
Posts: 1789
Location: Commerce City, Co
Just make your own bracket Ben. We have made three using angle iron and the stock a/c components. Have not had any issues to 9250rpm and 7 years of abuse.

_________________
1985 Mitsubishi Cordia
Build in progress


Top
   
PostPosted: Mon Jul 19, 2021 2:25 pm 
Offline
Member

Joined: Tue May 12, 2009 3:44 am
Posts: 77
Location: California
I just started this process. We pulled the mounting bracket off of a 1g AWD 5 speed and put it on the CSM half shaft but the holes dont line up quite right. From what it looks like, were going to have to drill out the holes a bit. Is this normal? Has anyone gotten the bracket to line up without modifying it? Cutting the CSM bracket is not an option as two mounting bolts are necessary for structural integrity with higher HP applications.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited