4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 4:48 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 272 posts ]  Go to page Previous 111 12 13 14 1519 Next
Author Message
 Post subject: Re: whe3ls's hyundai
PostPosted: Tue Apr 30, 2013 10:04 am 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
Well the car has pissed me off. My spending has gone rouge. So the 1.8 is toast the axles are seized in the trans. Boy aren't cars fun.... I have ordered the peices to make my manifold and a down pipe. Going to earn some money this weekend for my steering wheel set up. And possible have enough for end clutchs for the f4a33 and new axles. Or ill try and buy my buddies s366 from him lol.

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Wed May 01, 2013 4:48 pm 
Offline
CSM Junkie
User avatar

Joined: Wed Feb 28, 2007 10:20 pm
Posts: 635
Location: New Bedford, Mass.
I say, balls to the walls! Drop the 4g63 and the turbo trans then have fun :wink:


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Fri May 03, 2013 4:39 am 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
That's the plan. I need to get rid of that shell anyways

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Fri May 10, 2013 6:11 pm 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
Well the laser is gone but before it went I pulled the engine and trans out.
Image
Anyone know which drivers side axle I can use if I use a dsm intermediate shaft?

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Sat May 11, 2013 12:03 pm 
Offline
CSM Junkie
User avatar

Joined: Wed Feb 28, 2007 10:20 pm
Posts: 635
Location: New Bedford, Mass.
Quote:
Well the laser is gone but before it went I pulled the engine and trans out.
Image
Anyone know which drivers side axle I can use if I use a dsm intermediate shaft?
All the axles on 1gs are all the same, I used 1g awd passenger side in my auto elantra.


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Sat May 11, 2013 2:42 pm 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
That's good to know what about drivers side

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Sun May 12, 2013 7:56 am 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
Got some parts in. Today ill post some cool pics later

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Sun May 12, 2013 12:33 pm 
Offline
CSM Junkie
User avatar

Joined: Wed Feb 28, 2007 10:20 pm
Posts: 635
Location: New Bedford, Mass.
Quote:
That's good to know what about drivers side
Fwd axle yes, AWD not to sure yet but I'm sure it's the same. I will be running a AWD driver side axle in my FWD 1g so I'll let you know how I made out.

Keep up the good work, all this work will pay off in the end I swear, to have a sleeper the honda boys will be all in a daze,lol.


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Mon May 13, 2013 5:00 am 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
<<<<< I just noticed it says csm junkie. It should be changed to j1 junkie lol



In na from the elantra was faster than most hondas, Lol. I enjoy messing with the subarus and the so called turbo neons aka srt 4s. I got some more parts in put my phone doesn't want to let me post them. I picked up 2 45 degree bend, 2 90s and a 2 foot straight peice of 2.5inch 304 stainless as well as a 1.5 90, and a 2 foot straight peice for the dumppipe. As well I also got 3 sch 10 1.5inch 90 so I can start building my manifold. And so I can run my nrg steering wheel that I still need to order I got a grant hub adaptor and an adaptor for 5 and 6 bolt steering wheels. And another 2-2.5 inch 90 coupler to replace the one I have that has a hole in it.


Just oredered some oem parts. Lower rad hose non ac heater duct and the 3 hole thermostat housing gssket

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Thu May 16, 2013 11:19 pm 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
Pretty manifold its not done yet.
Image

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Tue May 28, 2013 10:27 am 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
moved the car, time to do any drive train swap. yaya.

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Fri May 31, 2013 2:28 am 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
so today was a very busy day. so i started off today by moving my car into the shop today
Image
started pulling stuff off. pulled the hood off and alxes out
Image
Image
Image
pulling more stuff out
Image
dropped the motor out the buttom, raised the car up to pull it out
Image
Image
its out
Image
emepty
Image
pile of elantra parts
Image
oh hey i found my 4g63
Image
and phone died. :(
put i got the engine and trans in. transmission mount needs modded.

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Fri Jun 07, 2013 1:44 am 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
lets start off with the manifold
Image
Image
Image
Image
Image

last but not least
Image

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Fri Jun 07, 2013 2:32 pm 
Offline
CSM Junkie
User avatar

Joined: Sun Mar 09, 2008 5:43 am
Posts: 580
Location: FRANCE
Curious to see the result about your custom exhaust manifold, but i like the compact size and your hyundai project :D


Top
   
 Post subject: Re: whe3ls's hyundai
PostPosted: Sat Jun 08, 2013 12:42 am 
Offline
Some call me a god
User avatar

Joined: Mon May 18, 2009 8:53 pm
Posts: 1494
Location: Seattle, WA
Nice progress, slowly but surely getting there. :)

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 272 posts ]  Go to page Previous 111 12 13 14 1519 Next

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited