4g61t.org
http://4g61t.org/forum/

I'm new around here
http://4g61t.org/forum/viewtopic.php?f=9&t=33692		 Page 1 of 2
Author:  CSM diesel [ Mon Nov 01, 2010 10:19 pm ]
Post subject:  I'm new around here
Hello fellow CSM'ers.

I have been into DSM's since High School, drove this:

Image

Since then I have moved on to performance diesel, and have built a set of compound turbos utilizing a he351ve (VGT from a 6.7L Cummins) compounded with a HX52; seen here:

Image

And now as life has drawn full circle, I am adventuring back into DSM/CSM's, partially due to my father's success with a 1993 Talon w/ my old HX35.

I plan on purchasing a CSM of my own. Which will be rightfully equipped with the aforementioned, and wildly effective HX35.

Cheers
Author:  Coltsfan [ Tue Nov 02, 2010 12:38 am ]
Post subject:  Re: I'm new around here
Well if nobody else is going to say it, Welcome to the board!
Author:  wibblersnatch [ Tue Nov 02, 2010 8:41 am ]
Post subject:  Re: I'm new around here
Welcome indeed! Get some pics up when you get it!
Author:  CSM diesel [ Tue Nov 02, 2010 3:51 pm ]
Post subject:  Re: I'm new around here
Quote:
Welcome indeed! Get some pics up when you get it!

The plan is to pick up this bad boy:

http://www.4g61t.org/forum/viewtopic.php?f=66&t=33422

the wife is calling it the "moo-cow dust buster"
Author:  biglady112 [ Tue Nov 02, 2010 5:13 pm ]
Post subject:  Re: I'm new around here
Is Jim your dad?
Author:  CSM diesel [ Wed Nov 03, 2010 11:52 am ]
Post subject:  Re: I'm new around here
Quote:
Is Jim your dad?
Yessir.

I am Benjamin Zapp, son of Jim Zapp.

I have been a bit of a prodigal son, in casper WY in the oil field. Degree'd MechE from Mines, and I have landed an office gig with a small Exploration company in Denver. So I will be moving home!

My dad doesnt know it yet, but this car will be his competition next summer, he plans on swapping a 4g mirage and racing that instead of his green talon, which is almost identical to my old 1994 green Talon shown above.
Author:  biglady112 [ Wed Nov 03, 2010 5:43 pm ]
Post subject:  Re: I'm new around here
You would win hands down with a csm over a dsm, but is he is getting one, then it will be interesting. Let him know about our site here.

I know your dad has had in interesting time with his car. I think he bought a thing or two from me as well.
Author:  CSM diesel [ Wed Nov 03, 2010 5:48 pm ]
Post subject:  Re: I'm new around here
Quote:
Quote:
Is Jim your dad?
he plans on swapping a 4g mirage and racing that instead of his green talon, which is almost identical to my old 1994 green Talon shown above.
He was looking at a blue/green 4g mirage. Dont know if he picked it up or not, but he plans on swapping in his engine from the talon.

He must like taking the engine and transmission out, b/c I lost count how many times he has done it. I put the short block together the last time it was out...
Author:  CSM diesel [ Wed Nov 24, 2010 11:01 am ]
Post subject:  Re: I'm new around here
Car made it home a week ago, made its way into the garage for a new/larger battery.

The hawker/genesis 16ep is a little tired.

Free mods completed.

Upgrade path as follows:

2g MAF
ecuLink v3
850cc w/ walbro 225hp
evo3 16g
3" exhaust
clutch
dsm SMIC w/ 2.25" inlet & 2.5" outlet
e85

11's??
Author:  biglady112 [ Thu Nov 25, 2010 11:34 pm ]
Post subject:  Re: I'm new around here
One step at a time.

But it sounds like your dad is finally aware and wants to get serious. If he wants to he needs to take everything out of his dsm and put it in a CSM. Forget trying to have two cars. He could far surpass his 1g if he dropped all that in a CSM.
Author:  CSM diesel [ Mon Nov 29, 2010 10:38 am ]
Post subject:  Re: I'm new around here
Worked on the sh*tpile this holiday weekend.

Basic maintenance thus far:

Fuel Filter
Plugs: NGK bpr6es
PCV valve
oil change

and gave it a bath.

Currently running at 0.8bar or ~11.5psi, and it is fun!
Author:  CSM diesel [ Mon Jan 10, 2011 3:45 pm ]
Post subject:  Re: I'm new around here
Small update:

2g MAF - DONE
ecuLink v3 - DONE
850cc w/ walbro 225hp - Kinda... evo 560's and a rewire of factory pump
evo3 16g
3" exhaust
clutch
dsm SMIC w/ 2.25" inlet & 2.5" outlet
e85

Ordering a downpipe, bends, & muffler for the exhaust as the next project.

Currently at 20lbs/min, 8*, @16psi on 91oct.
Author:  CSM diesel [ Mon Jan 31, 2011 12:10 pm ]
Post subject:  Re: I'm new around here
Update:

2g MAF - DONE
ecuLink v3lite - DONE
1150cc w/ walbro 225hp - DONE (kinda)... evo 560's & 225hp
HX35
3" exhaust - DONE
clutch
Water/Air Intercooler
e85
slicks
Author:  CSM diesel [ Wed Jul 27, 2011 9:24 am ]
Post subject:  Re: I'm new around here
Update:

2g MAF - DONE
ecuLink v3lite - DONE
1000cc w/ walbro 225hp - DONE
HX35:
Image
3" exhaust - DONE
clutch - DONE
Water/Air Intercooler - hopefully this week
e85 - DONE
slicks - DONE
Author:  Mechacode [ Wed Jul 27, 2011 2:12 pm ]
Post subject:  Re: I'm new around here
Should boogy real nice.
Page 1 of 2 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/