4g61t.org

Specializing in the 3g CSM
It is currently Sun Apr 28, 2024 7:06 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Fri Oct 21, 2005 10:47 am 
Offline
Restricted Newbie

Joined: Sat Oct 15, 2005 8:19 am
Posts: 4
Location: west auckland (driftland) NEW ZEALAND
hi my name is greer
im 25,i live in Auckland,New Zealand (land of the long white cloud and home of the all blacks rugby team)

my car......
1988 mitsubishi lancer GSR (jap spec) c63a 4g61t fwd

i picked this car up about 6months ago in standard form,274000 kms on the clock, cost me $1000 nz dollars

so then the modding started.............
2 1/2in exhaust from turbo straight through (no resonators) to stainless steel muffler, td04l turbo off a 1994 mitsy lancer gsr cd5a 4g93t (jap spec)
fitted with a screamer pipe, k&n air filter, ngk spark plugs (bp7es), top gun 8.8mm racing ht leads, fmic off a 98 lancer evo 5 cp9a (jap spec) with
custom ic piping, custom 3in intake pipe to turbo, 89 galant vr-4 4g63t e39a (jap spec)-air flow meter-injectors-throttle body.

suspension is factory kyb shocks,lowered 40mm with b&g springs,17in x 7in enkei tarmac evo wheels with 215/45/17 tyres,heavy duty front and rear brake pads

the car was going very well with these mods but that was not enough for me,so then came.........

td05h 14g turbo and exhaust manifold off a e39a vr-4, sard fuel pressure regulator,gizzmo eletronic launch controller, gizzmo chipped computer "md128618" off a e39a vr-4......i picked the car up from the workshop and was driving around when i decided to go on the motorway for a test....3rd foot flat was going the fastest it had been yet, i saw the boost go up to 20psi then boommmmmmm!!!!!!!!!!!! it was all over blown motor,it died at 278???kms.......

so now i have pulled the motor out (lucky i had a spare motor sitting in my garage at home which had been there for about 4years from a 1991 mitsy lancer gsr c73a it had about 110???kms).........so i have put that in now with a few more mods......trr extractors with tial 38mm external wastegate,new high flow fuel pump,i got a few things painted blue and some other parts polished........still not running yet

gear box is km210,with standard clutch

have not run this car on the 1/4m yet but wont be long now

here are some pics
engine
http://photobucket.com/albums/a380/nfam ... dcp006.jpg

http://photobucket.com/albums/a380/nfam ... dcp005.jpg

http://photobucket.com/albums/a380/nfam ... dcp004.jpg

thecar
http://photobucket.com/albums/a380/nfam ... dcp002.jpg

speedo
http://photobucket.com/albums/a380/nfam ... 005018.jpg

door mouldings
http://photobucket.com/albums/a380/nfam ... 005017.jpg

rims
http://photobucket.com/albums/a380/nfam ... dcp009.jpg

the car
http://photobucket.com/albums/a380/nfam ... 05_006.jpg

muffler
http://photobucket.com/albums/a380/nfam ... dcp003.jpg

8) 8) 8)

_________________
c53a mirage cyborg 4g61t fwd 184kw atw on 16psi 14.028@179kmh not much traction
c63a lancer gsr 4g61t fwd (almost finished)
e39a eterna zr-4 4g63t needs fixing(engine)
s13 silvia ca18det 182kw atw on 0.6bar now waiting for panelbeating
Image Image


Last edited by nfamis on Sun Oct 23, 2005 1:39 pm, edited 5 times in total.

Top
   
 Post subject:
PostPosted: Fri Oct 21, 2005 4:10 pm 
Offline
The happy administrator
User avatar

Joined: Tue Apr 20, 2004 3:20 pm
Posts: 5583
Location: Wisconsin
You weren't kidding about the blue, I think I'm depressed now. Looks good.

:D

_________________
Had a:
1991 Eagle Summit ES Hatchback - 4g15 12v 5spd
1991 Dodge Colt -4g15 12v 4spd
Have a:
1978 Oldsmobile Cutlass - 468BBO TH350
Round 3:
1990 Dodge Colt-4G63T 5spd


Top
   
 Post subject:
PostPosted: Sat Oct 22, 2005 4:00 am 
Offline
Restricted Newbie

Joined: Sat Oct 15, 2005 8:19 am
Posts: 4
Location: west auckland (driftland) NEW ZEALAND
:D thanks i have too much spare time!! :lol:

_________________
c53a mirage cyborg 4g61t fwd 184kw atw on 16psi 14.028@179kmh not much traction
c63a lancer gsr 4g61t fwd (almost finished)
e39a eterna zr-4 4g63t needs fixing(engine)
s13 silvia ca18det 182kw atw on 0.6bar now waiting for panelbeating
Image Image


Top
   
 Post subject:
PostPosted: Sat Oct 22, 2005 5:14 am 
Offline
Restricted Newbie

Joined: Sat Oct 15, 2005 8:19 am
Posts: 4
Location: west auckland (driftland) NEW ZEALAND
here is my gf's car it is 1990 c53a mirage 4g61t fwd
it has similar mods with my car, had this car for 4yrs and have been doing it up for a while and its not too bad

184kw atw on 16psi
14.028@179kmh at champion dragway on street tyres too much wheelspin

gearbox is f5m22

here the pix.............

me at the drags

http://photobucket.com/albums/a380/nfam ... mall14.jpg
http://photobucket.com/albums/a380/nfam ... _sp013.jpg
http://photobucket.com/albums/a380/nfam ... _sp014.jpg

engine
http://photobucket.com/albums/a380/nfam ... 1Small.jpg
http://photobucket.com/albums/a380/nfam ... 2Small.jpg
http://photobucket.com/albums/a380/nfam ... -Small.jpg
http://photobucket.com/albums/a380/nfam ... 4Small.jpg
http://photobucket.com/albums/a380/nfam ... 005006.jpg
http://photobucket.com/albums/a380/nfam ... 005008.jpg

the rims
http://photobucket.com/albums/a380/nfam ... 005001.jpg

_________________
c53a mirage cyborg 4g61t fwd 184kw atw on 16psi 14.028@179kmh not much traction
c63a lancer gsr 4g61t fwd (almost finished)
e39a eterna zr-4 4g63t needs fixing(engine)
s13 silvia ca18det 182kw atw on 0.6bar now waiting for panelbeating
Image Image


Top
   
 Post subject:
PostPosted: Sat Oct 22, 2005 6:44 am 
Offline
Some call me a god
User avatar

Joined: Mon Oct 13, 2003 4:20 am
Posts: 1254
Location: Auckland, New Zealand
Sup biarch :lol:

_________________
1990 C83A 4WD 4G63T powered hatch - [PSIBRG]
1992 JZX91 2JZ powered Toyota Mark II


Top
   
 Post subject:
PostPosted: Sun Oct 23, 2005 1:33 pm 
Offline
Restricted Newbie

Joined: Sat Oct 15, 2005 8:19 am
Posts: 4
Location: west auckland (driftland) NEW ZEALAND
here is my other toy for doing some driftys

1989 nissan silvia s13 5spd man,5spd manual,ca18det,garrett t28 turbo,extractors with trr 40mm extrenal wastegate,blitz fmic,custom piping,custom induction pipe to turbo 3in,hks bov,dragsport air filter,malpassi fuel press reg,chipped computer,3in exhaust,heavy duty race clutch,light weight flywheel,lsd diff,adjustable coil overs

182kw atw on 0.6bar + more to come.......................

the car
http://photobucket.com/albums/a380/nfam ... silvia.jpg

burn outs
http://photobucket.com/albums/a380/nfam ... t=MF35.jpg
http://photobucket.com/albums/a380/nfam ... t=MF36.jpg
http://photobucket.com/albums/a380/nfam ... t=MF37.jpg
http://photobucket.com/albums/a380/nfam ... t=MF38.jpg

then there is a silence
http://photobucket.com/albums/a380/nfam ... tacked.jpg

stay tuned right here................... 8) :supz: :wall:

_________________
c53a mirage cyborg 4g61t fwd 184kw atw on 16psi 14.028@179kmh not much traction
c63a lancer gsr 4g61t fwd (almost finished)
e39a eterna zr-4 4g63t needs fixing(engine)
s13 silvia ca18det 182kw atw on 0.6bar now waiting for panelbeating
Image Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 63 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited