4g61t.org
http://4g61t.org/forum/

Devo's '92 Summit DL
http://4g61t.org/forum/viewtopic.php?f=9&t=22411		 Page 2 of 10
Author:  Flying Eagle [ Wed Sep 19, 2007 8:23 am ]
Post subject: 
OMG, is the ECU case grounded? :o Take a 5 min break and pull that old ECU, and get the 4g37 unit in place. You don't want to fry that used ECU due to the case not being grounded; you will see the ground tether when you pull out the old case/ECU. Don't worry, you wouldn't have known if we hadn't told you about this, so this is learning step #1, but hopefully before any consequences come about. :lol:
Author:  Devolution [ Wed Sep 19, 2007 3:56 pm ]
Post subject: 
heh, i figured there'd be something wrong with just leavin it there :p i'll try and install it properly tonight, depends on whether or not my girlfriend kidnaps me to work on HER car or not
Author:  Devolution [ Tue Jan 22, 2008 2:17 am ]
Post subject: 
went on a bit of a spending spree....


Image

not pictured here are the rear calipers and caliper brackets, B&G lowering springs, 4 x Falken Azenis RT-615s, and my new rims(still waiting to see if i get those Sprint Hart CP-Fs, otherwise they'll be 16x7 Konig Feathers).

looks like i've got some work ahead of me.
Author:  89Mirageman [ Tue Jan 22, 2008 8:47 am ]
Post subject: 
Some of that looks familiar :P , you need to get to work man. And get the Feathers!!!!!
Author:  Devolution [ Mon Mar 31, 2008 4:03 pm ]
Post subject: 
finally got my car back on the road. replaced the driver's side axle and upper strut mount(tore it in 2 taking everything apart, i think it was original equipment, never been changed).

now i just have to get around to putting all the other fiddly bits on the car.

Brakes are going to get done this weekend, along with the elantra front sway bar. also going to be removing the A/C(doesn't work anyway), saves me some weight, and then my damn front strut bar will fit.

also bidding on some auctions for the Lancer rear trunk garnish :D as well as red/white reflectors for the trunk. have to wait a few days to see if i get those though.

still have to get the rest of the bits together to swap the 4G61NA into it, but that'll come later, probably sometime late summer.

pictures later when i start tearing everything apart.
Author:  Red Sleeper [ Mon Mar 31, 2008 4:56 pm ]
Post subject: 
what lights do you want? there is a 4 door mirage at the scrap yard. Maybe i could go pick them up for you ;)
Author:  Devolution [ Mon Mar 31, 2008 8:41 pm ]
Post subject: 
i'm on the hunt for the red/white 92 mirage tail lights.

Image
Author:  Red Sleeper [ Mon Mar 31, 2008 8:49 pm ]
Post subject: 
Hmm. we'll im going tomorrow. I'll see what ones they are. I dont remember
Author:  SLobra [ Tue Apr 01, 2008 6:49 am ]
Post subject: 
im on the hunt for those too. I love what lilevo did with the smoked reflector piece and everything. How the interior in your Summit Devo?
Author:  Devolution [ Tue Apr 01, 2008 10:14 pm ]
Post subject: 
the interior is in decent shape(albeit a little dirty), with just one crack on the dash right by the clock.

Image
Image
Image
Image

I didn't get the auctions for the Lancer rear bar and reflectors, so i figure if i can get the red/white tails, along with the red/white reflectors, then i'll just paint the spare set i have black and stick those on the trunk instead.
Author:  SLobra [ Tue Apr 01, 2008 11:14 pm ]
Post subject: 
looks good! Did you see the 4g61na summit for sale? power windows, turbo style seats and steering wheel, turbo cluster, turbo wheels for 600 bucks
Author:  Devolution [ Wed Apr 02, 2008 12:54 am ]
Post subject: 
i'd love to buy it, but it's 1400km away from me, and i wouldn't have the cash for it, not for another week or so.

doesn't mean i'm not still considering it....
just means i'm thinking about it a little more than if it was just sitting across the river in Port Huron.
Author:  89D15CRX [ Fri Apr 04, 2008 11:29 am ]
Post subject: 
I like that head unit man. It looks good in there. I'd really like to get a 5 speed for my car because I'm swapping in a 4G67t soon and I plan on rocking the 4 speed for the time being. I need to save up some money and get cracking on this like right now...lol Good looking car though. The body work is a pain but it's not all that hard to do. Just stick to it.
Author:  Devolution [ Thu Apr 17, 2008 10:02 pm ]
Post subject: 
got a few things done on the car in the last little while.

put the elantra discs and Talon calipers on, they fill the 15" rims out quite nicely now :p

put the tach'd cluster in as well, though i have to take it back out since half the bulbs are burnt out.

and i finally picked up a clean gas tank for the car as well(it's been urinating fuel everywhere for about 8 months).

cleaned all the surface rust off the new tank, put 2 coats rust inhibiting primer, 2 coats Tremclad black, 2 coats of rubberized panel guard, and 2 more coats tremclad on that :p no more rust for me.

got it put on this afternoon, quite happy to finally be able to fill the tank up again.

i'll post pics of everything tomorrow when i get a chance.
Author:  SLobra [ Thu Apr 17, 2008 10:47 pm ]
Post subject: 
cool, cant wait to see some pics.
Page 2 of 10 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/