4g61t.org
http://4g61t.org/forum/

WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
http://4g61t.org/forum/viewtopic.php?f=68&t=32296		 Page 1 of 1
Author:  i8av8 [ Sat Apr 24, 2010 11:15 am ]
Post subject:  WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
IF YOU VIEW THREAD PLEASE BUMP!

Name: Vance
Location: Franklin, tn
Item: 1991 Eagle Talon TSI
Price: Not sure.. really Just want to trade
Contact: PM or txt 615-788-6281

Here is a video of it idling http://www.youtube.com/watch?v=xVGj4O8n48Q


The Body on the car is almost perfect, one scratch on front fender and a small crack in rear bumper. Everything on the car works! Just tuned the car yesterday on 12lbs, Can't get the boost controller to work properly so I need to replace that so I crank the boost up to 25lbs and retune.


approx 195k on body and 25k on the motor
DSMlink v3
DNP Tubular Manifold.
Bullseye T04B 60 Turbo.
2nd Gen Maf Setup.
Turbo Back Exhaust.
Front Mount Intercooler.
Greddy Type S Blowoff Valve.
Walboro 255 Fuel Pump.
Injector Clinic 750 cc.
Aeromotive Fuel Pressure Regulator.
Innovative Motorsports Wideband w/Gauge.
90 Big Rods.
ACL 8.5:1 Pistons.
ARP Head Studs.
Balance Shaft Removed.
Showdown Motorsports Head.
Brian Crower 272 Cams

I am probably forgetting somethings.


Image

Image

Image

The FPR is now mounted properly
Image
Author:  i8av8 [ Sun Apr 25, 2010 12:09 pm ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
no bumps? lol up for a clean 1g.
Author:  justinschmidt [ Sun Apr 25, 2010 12:43 pm ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
FYI 1990's came with weaker rods than 1991, I wouldn't call them "big rods"

1991-1992.5 came with what are known today as "1g big rods"
Author:  CaptainTonus [ Sun Apr 25, 2010 1:15 pm ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
Quote:
FYI 1990's came with weaker rods than 1991, I wouldn't call them "big rods"

1991-1992.5 came with what are known today as "1g big rods"
Not true. All 6 bolts had the same size rods. After 92.5 they went to 7-bolt with the "weaker" rods which aren't really that much weaker at all.
Author:  i8av8 [ Sun Apr 25, 2010 2:50 pm ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
Quote:
Quote:
FYI 1990's came with weaker rods than 1991, I wouldn't call them "big rods"

1991-1992.5 came with what are known today as "1g big rods"
Not true. All 6 bolts had the same size rods. After 92.5 they went to 7-bolt with the "weaker" rods which aren't really that much weaker at all.

This^


Just got done cruising in the car, it loves this weather! it has a small oil leak that I noticed from the oil filter housing today. I will get that addressed asap!
Author:  chuck403 [ Sun Apr 25, 2010 5:29 pm ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
Trade my car and cash for yours. Bump Up.
Author:  i8av8 [ Mon Apr 26, 2010 10:33 am ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
^I shot you a text, pm me with more info and well go from there.
Author:  mountaineerjeff [ Mon Apr 26, 2010 9:50 pm ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
tranny/clutch?
Author:  i8av8 [ Tue Apr 27, 2010 3:25 pm ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
Quote:
tranny/clutch?
Stock Clutch right now, I am about to order a southbend clutch, and the trans is about to be built. Also a 4 bolt rear will be in the car
Author:  mcl0vin [ Wed Apr 28, 2010 12:51 am ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
i wish you where not so far away.

good luck with the sale.
Author:  i8av8 [ Thu Apr 29, 2010 12:17 am ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
and up.
Author:  4G15COLT [ Wed Apr 20, 2011 10:45 pm ]
Post subject:  Re: WTT: 1991 AWD 1G Talon DSMLINK/BULLSEYE/ACL/BC
What u looking to trade for?
Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/