4g61t.org http://4g61t.org/forum/ |
|
4g61t http://4g61t.org/forum/viewtopic.php?f=67&t=40993 |
Page 1 of 1 |
Author: | milcasten [ Fri Mar 17, 2017 7:45 pm ] |
Post subject: | 4g61t |
WTB ORIGINALS CAMSHAFTS OF 4G61T |
Author: | Flying Eagle [ Sat Mar 18, 2017 8:38 am ] |
Post subject: | Re: 4g61t |
Curiosity. Why stock 4g61t camshafts? Do you have non stock camshafts installed in a 4g61 motor right now? |
Author: | milcasten [ Sun Mar 19, 2017 6:00 pm ] |
Post subject: | Re: 4g61t |
Nop |
Author: | mitsubishikid [ Fri Mar 24, 2017 1:04 am ] |
Post subject: | Re: 4g61t |
I know it's a long shot, but are the elantra 1.6 cams the same? |
Author: | Flying Eagle [ Fri Mar 24, 2017 6:31 am ] |
Post subject: | Re: 4g61t |
Probably not due to NA and turbo cams having different profiles/overlap/event duration. Some have experimented with NA cams in turbo motors, but still best to install turbo cams. The OP could install 1g stock turbo cams, with no problems. I ran them with corresponding 1G MAF, 1G ECU (1990 direct fit, preferred 1991-94 but wires to CAS and TPS need a jumper harness) and 450 injectors, and you could install a Walbro 190 (with suggested AFPR) or 1G stock fuel pump with matching FPR for the ECU type and have lots more power and throttle response. Also highly suggested to install a 1990-94 TB (90 requires no wiring changes), and you could install LiNk V2-3, if you wanted to check tune but always suggested to install a new knock sensor and put in a wideband 02. |
Author: | Mirage2017 [ Thu Mar 30, 2017 6:02 pm ] |
Post subject: | Re: 4g61t |
I really recommend doing a salvage yard search. Try car-part.com to do a search. Ive had some good luck with them. Hope this helps! |
Author: | thomcasey [ Fri Mar 31, 2017 6:54 am ] |
Post subject: | Re: 4g61t |
http://www.usedpartx.com/usedparts-stor ... parts.html |
Page 1 of 1 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |