4g61t.org

Awesome thanks for grabbing those. Just PM me your paypal. When you have them side by side with your mirage brackets, do they look identical?

_________________
'89 Summit Sedan AWD - 9.1 at 157
'92 Evo 1
'10 CTS-V

I pulled my mirage bracket off and compared them all together


My findings are they are the same, so I guess at least some mirage hatchbacks also have these brackets on them stock, I have no reason to suspect mine were swapped/modified, the PO just drove the car to and from work, and there is no signs that someone has been in there for a while, most of the rubber is tired and old and matches the age of the car.

I'm going to clean them up, and then I'll pm you my paypal info.

_________________
Abe

Nice that's good info to have and thanks again for grabbing those.

_________________
'89 Summit Sedan AWD - 9.1 at 157
'92 Evo 1
'10 CTS-V

Hey man pick a color among these,red,black,silver.

_________________
Abe

Haha if you're asking about paint color then definitely black.

_________________
'89 Summit Sedan AWD - 9.1 at 157
'92 Evo 1
'10 CTS-V

Okay awesome, I'll have pictures when they are all done.

And again is your csm sedan a 5 speed or auto trans model I noticed my csm hatch is a 5 speed and both of the cars I pulled the brackets off of were equipped with a 5 speed so maybe csms with auto trans are less likely to have the proper lower brackets?

_________________
Abe

Awesome thanks again. My car originally was a '89 Eagle Summit 4g61 n/t 5speed sedan. No idea what could have been changed on it in the past though.

_________________
'89 Summit Sedan AWD - 9.1 at 157
'92 Evo 1
'10 CTS-V

Alright they are prepped, coated, and almost ready to ship, I could have done a better job, hence they are no show car winning pieces, but for something that no one really is going to see vary often [Hopefully:lol: I know these cars need work sometimes] they will look good, all in all this should provide a rust free finish for a long while, notice the bolts are also coated on the tops, the images are a little deceptive they are in a diamond black metallic finish not silver its the closest thing I had to black on hand I hope its okay with you.

_________________
Abe

Those look perfect. Above and beyond anything I was expecting haha. Thanks for doing that. Just send pm me your PayPal and I'll message you my address. - Chris

_________________
'89 Summit Sedan AWD - 9.1 at 157
'92 Evo 1
'10 CTS-V

yeah I try to make parts look better then they came to me [if I can], these particular parts did not look good, I was thinking basic spray paint on them initially, but In my experience with spray paints I felt the best way to avoid rust is powder coating, so I sand blasted all the rust away along with all the old paint and applied the powder on the hot parts, and a light clear coat instead the clear coat was tricky sine I've rarely worked with it, but I guess now I have something else to work on skill wise okay pm sent.

(Abe)

_________________
Abe

Hi Guys;

I am also looking for some brackets for my Sedan project.
I just recently received some Hyundai LCA.

My sedan did not came with the typical bracket.
Please PM me if you have anything or let me via facebook.

Omar Vazquez in the Perfomance CSM group.

Ok man, I'll get a set together for you, I'll send you a pm once It's all ready to go.

_________________
Abe

Perfect... thanks.