4g61t.org

Just as the title says, only need this and not the o2 housing. I don't even need the clamp that attaches it to the center cartridge.

BUT THE HOTSIDE MUST NOT have any cracks inside whatsoever! Looking to replace this piece on my 14b so I can finally run it.

Pics and name a fair price, please.

_________________
Good stuff - trucks bring it!

1. no cracks? your kinda dreaming here.
2. dont sweat it. they work just fine with cracks.

Maybe I should take a few pics and start a thread to gauge opinion, even though a few people here have told me that cracks in the exhaust housing are boost killers.

I came across a local trying to sell a nice 14b w/attached manifold and o2 housing, though quickly declined buying it when I asked and found out the exhaust housing had some tiny cracks, which the seller told me to simply weld and fix. No way.

_________________
Good stuff - trucks bring it!

post pics. I assure you with nearly 20 years of solely 4g63 experience I have done it all.

Small cracks are common, its more off an issue if you have large cracks around the wastegate flapper. On 20+ year old parts that are prone to cracking, its going to be hard to find a "Perfect" one.

_________________
49 International KB-2
72 Dodge Colt
73 Dodge Colt (Project)
84 GMC K3500
85 Dodge D50 Diesel Swap
90 Mighty Max V6
89 Mirage Turbo
94 Mighty Max
99 Montero

Don't rule out a 7cm 16g housing. Or even an Evo III 16g housing. A lot more of those that will be in good shape,

_________________
1985 Mitsubishi Cordia
Build in progress

Thanks for the heads up. I didn't think about that route.

_________________
Good stuff - trucks bring it!

If you're still looking for one email me at spinsallfour@gmail.com

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R