4g61t.org

Hey guys im after a rear strut brace for my GSR, ive been looking on trademe/ebay but not really any measure up to the correct measurement i need to bolt straight on to my rear struts. Anyhoo the measurements needed is 110mm from center(bolt hole) to center on one side of the brace and 1090mm from center on the left side of the brace to the center on the right side of the brace.
So if anyone has a brace that suits them measurements for sale let me know
CHeers

_________________
90" CB GSR 4G61T
91" CB GSR 4G61T
91" CB GSR 4G61

Ebay has a set for a 4g Mirage that can be modified with a little welding.

http://cgi.ebay.com/Front-Rear-Up-Strut ... 35a9181fd4

Cheap too!

Just get one for a 2G DSM. They're a direct bolt on.

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped

Thanks for that link Coltsfan this strut brace might fit, ive messaged hit to see if the measurements match up.

You sure a 2g DSM would be the same measurements as 110mm/1090mm , i wouldnt think they would be.

Cheers

_________________
90" CB GSR 4G61T
91" CB GSR 4G61T
91" CB GSR 4G61