4g61t.org

Unfortunately, the rear brake assembly had some pretty bad rust issues. The calipers and brackets might be salvageable but the cables were pretty well perished.

-Tim

pm sent

_________________
1987 C10 mitsu mirage 2.0 turbo (mean sleeper) in rerstoration process

Do you have the hot pipe setup from the turbo to intake mani, and intake hose from air box to turbo?

_________________
89 plymouth colt gt work in progress

I need the bumper lips, bumpers lights (all) and anntena.

_________________
My Feedback?
Asked
Bowdown
MattGSR
Coltsfan
Moulin13
Wrx110487

Most of the drivetrain parts are being used in another project. Let me see if I have anything in the way of spares.

Antenna is gone. Bumper lights are either gone or broken. I have someone more local interested in the lip but if that sale falls through, I'll let you know. However, I imagine shipping to the Philippines will be somewhat cost prohibitive.

Also looking for a 4g61 t timing bracket that the tensioner pulleys bolt too

_________________
89 plymouth colt gt work in progress

a 4g63 pulley bracket should be the same, shouldn't it?

_________________
Thom
1991 GVR4 1025/2000 (PTE 1200's, 16g, DSMLink v3, gm-maf, eagle/ross, .020 over, 272's, EVO VIII Wheels)
1992 GVR4 866/1000 (getting everything from above)

No the 4g63 one is wrong already tried that.

_________________
89 plymouth colt gt work in progress

Car still available? I need passenger door window!

_________________
Future 24hr of Lemons race car #hopefully