4g61t.org
http://4g61t.org/forum/

dsm/evo performance parts shearer fab, fluidyne, turbos, etc
http://4g61t.org/forum/viewtopic.php?f=66&t=38991		 Page 1 of 2
Author:  antilag_200 [ Wed Jul 16, 2014 8:18 am ]
Post subject:  dsm/evo performance parts shearer fab, fluidyne, turbos, etc
Clearing out a bunch of my parts. Here is the list of stuff. All prices do not include shipping or paypal fees. All prices are best offer. unreasonable offers will be ignored.
paypal information is antilag200@gmail.com

here is an up to date list of what is presented in this thread, which will be easier to sort through
Itemized list of things:
Evo related parts:

• Evo 8 crankshaft will need a polish/maybe needs to be turned $150
• Evo 9 timing tensioner 50k $20
• Evo9 water pump 50k :$30
• Fat house fabrications 3 inch intercooler pipes -$180
• BNIB kinsler fuel filter for buschur double pumper system on evo: $40
• 2 eibach 672# 7inch springs $80

Dsm Related parts:
• 98 gsx Mitsubishi crankshaft , will need a polish/maybe turned $100
• Fluidyne Radiator for 1g, has -16AN fitting welded to the top section, 2 fans included in the price $350
• RJS 4 point harness $50 ( might be expired)
• 4 inch thick griffin core front mount intercooler. I have ran 147mph in the quarter with this intercooler on my drag car $430
• Fresh pair of rebuilt and painted 1g front single piston calipers $80
• brown top injectors 360cc low impedence 6 injectors $60
• emanage harness lead for e01 $10
• BNIB Kiggly racing Crank angle sensor kit for 6 bolt -$190
• FIC 650cc Low impedance injectors --$140
• Momo steering wheel - $40



Fluidyne Radiator for 1g, has -16AN fitting welded to the top section, 2 fans included in the price $350
Image

Image

Evo 8 crankshaft will need a polish/maybe cut. It is a virgin crank $220
Image

RJS 4 point harness $50 ( might be expired)
Image

4 inch thick griffin core front mount intercooler. I have ran 147mph in the quarter with this intercooler on my drag car $430
Image
Author:  antilag_200 [ Wed Jul 16, 2014 8:19 am ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
Fresh rebuilt and painted 1g single piston calipers $80
Image

evo 9 tensioner with 50k $20
Image

evo 9 waterpump with 50k $30

Image

Image

2 eibach 672# 7inch springs $80
Image
Author:  antilag_200 [ Wed Jul 16, 2014 8:20 am ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
brown top injectors 360cc low impedence 6 injectos $60

Image

emanage harness lead for e01 $10

Image

Fathouse fabrications 3 inch aluminum intercooler pipe for evo, set up for a magnus V5 intake manifold, buschur racing fmic. Has twin tial flanges and a bung for an IAT $180 Spray painted black

Image


more stuff coming soon
Author:  antilag_200 [ Thu Jul 17, 2014 6:38 am ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
Parts added :

BNIB Kiggly racing Crank angle sensor kit for 6 bolt -$190

Image

BNIB Kinsler fuel filter for buschur double pumper system on evos -- $40
Image

FIC 650cc Low impedance injectors --$140
Image
Author:  antilag_200 [ Thu Jul 17, 2014 6:39 am ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
Momo steering wheel - $40
Image

Ecus Check the ecu id codes-- I think these are for colts
Ecu 1 -$20
Image

Ecu 2-$20
Image

Ecu 3-$20
Image

ecu 4- This is a 1990 auto dsm ecu -$20
Image


More later
Author:  xxNocturnalxx [ Thu Jul 17, 2014 11:15 am ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
Will the 13g be a direct replacement to my 11b? Does it come with any lines or can I reuse my own? The Venom rail has -6 ends?
Author:  antilag_200 [ Thu Jul 17, 2014 11:43 am ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
Venom rail has -6 an fittings on it.

I am not sure on whether the 13g will be a direct replacement When I get home I will run the numbers on the compressor housing and turbine wheel, to identify exactly what this turbo is, as I have never done such a swap. I don't have any lines with the turbo, it is just something that I had on my shelves.


Are the prices fair everyone, as there doesn't seem to be much interest in this stuff ?
Author:  thomcasey [ Thu Jul 17, 2014 12:14 pm ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
Definitely looks to be a 13g or a 13t
Author:  slowdsm [ Thu Jul 17, 2014 1:13 pm ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
u got some nice stuff here I wish I had some cash to pick up a few things :(


2 things..... the fic injector box... looks like it has aluminum spacers in there.. those should go with the fuel rail not the inj.... and the ecu's.. dsm didnt make a auto till 91 so it cant be a 90.

and that reusable oil filter is bitchen.. never seen one of those before.




Steve
Author:  antilag_200 [ Thu Jul 17, 2014 2:18 pm ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
Thanks fellas, I appreciate the info, this is only a tip of the iceberg. All prices are negotiable so don't be afraid to make offers, if you see something you like.
Author:  antilag_200 [ Fri Jul 18, 2014 6:26 am ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
list updated with sold items

shearer fabrications t4 top mount, with twin 38 mm gates, dump tubes, and 4 inch ss stainless exhaust kit -$1500-- pictures coming soon
Author:  Mechacode [ Fri Jul 18, 2014 12:50 pm ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
How much do you think shipping would be on the Colt GT steering wheel?
Author:  antilag_200 [ Fri Jul 18, 2014 1:23 pm ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
Probably no more than 15 bucks through ups I would imagine
Author:  Jeremy Rothrock [ Fri Jul 18, 2014 4:06 pm ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
I'm interested in the 18g turbo. It's a bastard turbo, correct? 20g compresser housing, 6cm exhaust housing and MHI internals? 5000k miles after being rebuilt by who?
Author:  antilag_200 [ Fri Jul 18, 2014 5:23 pm ]
Post subject:  Re: dsm/evo performance parts shearer fab, fluidyne, turbos,
I don't think its a bastard turbo, its an actual mitsu turbo that came this way.

I rebuilt it myself with g pop kits... car went 119 mph on ethanol with it so definitely tons of potential.

Check my project log when i installed it.
Page 1 of 2 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/