I will take a set.
So, these are complete drop in; retainer cap, retainer 1+2, and springs correct?
Can you match shipping to what you quoted here, for one of the few Canucks active here?
Oh, Paypal address please.
| 4g61t.org http://4g61t.org/forum/ |
|
| EVO 8 and 9 spring and retainer fire sale! http://4g61t.org/forum/viewtopic.php?f=66&t=35989 |
Page 1 of 2 |
| Author: | boostfreak [ Fri Feb 10, 2012 5:20 pm ] |
| Post subject: | EVO 8 and 9 spring and retainer fire sale! |
The stock pile is refreshed. I have 10 sets I can send out for $70shipped priority a set (plus paypal fees, or paypal as "gift") First come first serve, when I am out I am out! Evo 8/9 springs are a direct drop in for 1 and 2 g heads, and offer much better performance for high RPM use. I have used them to 8800 RPM's on 101300's without any valve float. Extremely light retainers and an actual beehive spring for a fraction of the price of aftermarket sets. Will not interfere with any aftermarket head bolts/studs. |
|
| Author: | MR HYDE [ Fri Feb 10, 2012 7:07 pm ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
I'm in the midst of rebuilding my head. I'll take a set from ya. Gimme your paypal address |
|
| Author: | Flying Eagle [ Sat Feb 11, 2012 10:42 am ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
I will take a set. So, these are complete drop in; retainer cap, retainer 1+2, and springs correct? Can you match shipping to what you quoted here, for one of the few Canucks active here? Oh, Paypal address please. |
|
| Author: | turbo_colt [ Sat Feb 11, 2012 12:07 pm ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Can vouch for these! Bought two sets off of him! Legit stuff. Glws |
|
| Author: | jeffball610 [ Sat Feb 11, 2012 1:13 pm ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Highly tempted. If anyone has a good way to replace springs with a head on, I'll order a set. I'll do some searching, but I will likely purchase a set. |
|
| Author: | Flying Eagle [ Sat Feb 11, 2012 5:15 pm ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
There are many compressor tools that work on head for these motors. Should be an easy search, heck there is a video on YouTube of a guy that can remove and install valve springs with common tools. You do have to use compressed air to keep the valves up and in place though. |
|
| Author: | MiguelDSM [ Sun Feb 12, 2012 3:48 pm ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
I can vouch for them also, that's what I currently have on my car, got them from him... good stuff... |
|
| Author: | boostfreak [ Mon Feb 13, 2012 11:54 am ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Quote: Highly tempted. If anyone has a good way to replace springs with a head on, I'll order a set. I'll do some searching, but I will likely purchase a set.
I can give you some tech help here-depends on if the head is on or off the car but wither way its not too bad once you get the hang of it.
|
|
| Author: | boostfreak [ Mon Feb 13, 2012 11:56 am ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Quote: I'm in the midst of rebuilding my head. I'll take a set from ya.
Replied
Gimme your paypal address |
|
| Author: | boostfreak [ Mon Feb 13, 2012 11:58 am ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Quote: I will take a set.
So, these are complete drop in; retainer cap, retainer 1+2, and springs correct? Can you match shipping to what you quoted here, for one of the few Canucks active here? Oh, Paypal address please. I honestly dont know! Shipping may be a tad more expensive-let me look into it. Worst case scenario $70 a pop? Yes, matched sets. Yes, drop in, you use the stock keepers (Evo valve keepers are actually different) and locator/seat (same as EVO) |
|
| Author: | boostfreak [ Mon Feb 13, 2012 11:59 am ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Miguel/Turbo colt- thanks for the vouches!~ |
|
| Author: | Flying Eagle [ Wed Feb 15, 2012 12:40 pm ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Ah, I have a set of EVO8 exhaust valves that are all prepped up, and some well cut intake valves from Curtis on the VR4 site, was wondering about the interchange. So, if I keep my stock head in place, I can just drop these in then; good to know! I'm in for a set. PM sent. |
|
| Author: | boostfreak [ Wed Feb 15, 2012 1:51 pm ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Quote: Ah, I have a set of EVO8 exhaust valves that are all prepped up, and some well cut intake valves from Curtis on the VR4 site, was wondering about the interchange.
Yes just remember to use the matching keepers for the valves you decide to use!
So, if I keep my stock head in place, I can just drop these in then; good to know! I'm in for a set. PM sent. |
|
| Author: | eddie [ Wed Feb 15, 2012 10:51 pm ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Still have any left? |
|
| Author: | boostfreak [ Thu Feb 16, 2012 11:27 am ] |
| Post subject: | Re: EVO 8 and 9 spring and retainer fire sale! |
Only 4 sets left |
|
| Page 1 of 2 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|