4g61t.org
http://4g61t.org/forum/

[NV] F.S. 2nd and 3rd gen colt parts 4g63t swap monts axles
http://4g61t.org/forum/viewtopic.php?f=66&t=35539
Page 1 of 1

Author:  deco_will_fly [ Tue Nov 01, 2011 10:41 pm ]
Post subject:  [NV] F.S. 2nd and 3rd gen colt parts 4g63t swap monts axles

Hi everyone, it’s been quite some time since I have been around here, and I am just popping in today to try and get rid of the rest of the 2nd gen colt parts I have left. These are mostly hard to find parts so I wanted to give someone who needs them a chance to get them before I toss them for good. So what we have here is this.
first off, I have a set of 2nd gen taillights for a sedan. These are in really good shape.
Next is a set of headlights. These are not in the best condition but when I needed a set these were the best I could find. One is in good shape the other one, well not great at all, the reflective material inside of it has mostly melted and bubbled off. It still works but I have no idea if it’s fixable.
next is a over fill/washer fluid tank for a 2nd gen
next is a g32bt transmition cover,
also some side indicators for an early 2nd gen, (the long skinny ones), and I have a bunch of front and rear bumper lights.

ok and now its time for the goods,

I have a brand new 3rd gen turbo pass axle. It was to long for my 2nd gen when I did my swap so I had to use the stock on, so this, well it never got used.
I also have an almost new 3rd gen driver side axle, with a stub shaft from a awd talon. This axle has about 300 miles on it.
Last, I have a full set of swap mounts. I have a modified tranny mount, (I don’t know if the 3rd gen swap needs this mount modified like this but the 2nd gen does). I have a rear mount that’s from an elantra, and was boxed in and beefed up. I have an elantra timing side mount and the stock front mount. From my understanding all mounts but the front mount work in a 3rd gen swap, and you just use your stock front mount.
Ok so that’s it, I’m not trying to make a bunch of money here really, I know some of these parts are hard to find, and even though there are not a lot of 2nd geners out there, it’s nice to have the extras. So just make an offer, pay for shipping, or pick it up and toss me a bone. Items are located in Las Vegas Nevada. As I said I’m not here much anymore, I’m currently playing the Nissan game so if you are interested in anything please email me. Deco_n_vegas@yahoo.com well that’s it, have a good day and thanks for looken. Oh and by the way, some of you guys are building some nice stuff, keep up the good work.

Image
Image
Image
Image
Image
Image
Image
Image

Author:  91talonharv420 [ Wed Nov 02, 2011 5:50 am ]
Post subject:  Re: [NV] F.S. 2nd and 3rd gen colt parts 4g63t swap monts ax

PM sent for axles, DIBS!

Author:  deco_will_fly [ Wed Nov 02, 2011 5:41 pm ]
Post subject:  Re: [NV] F.S. 2nd and 3rd gen colt parts 4g63t swap monts ax

Pm sent

Author:  deco_will_fly [ Thu Nov 03, 2011 2:24 pm ]
Post subject:  Re: [NV] F.S. 2nd and 3rd gen colt parts 4g63t swap monts ax

Axles sold. Anyone else want some of this. The motor mounts are swap ready. Hit me up. I can't hold on to this stuff for much longer. Trying to. Make room for my new build.

Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/