4g61t.org

Specializing in the 3g CSM
It is currently Fri Mar 29, 2024 3:56 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 175 posts ]  Go to page Previous 14 5 6 7 812 Next
Author Message
PostPosted: Wed Nov 24, 2010 12:22 pm 
Offline
Newbie

Joined: Tue Oct 05, 2010 2:46 pm
Posts: 35
Location: San Tan Valley, AZ
Quote:
I used FWD DSM cables. Had to use the "L" bracket that holds them on the caliper itself too.
Awesome! thanks for the info 8)

_________________
Kristen Bond

89 Plymouth Colt GT
90 Talon TSI AWD
94 Montero


Top
   
PostPosted: Wed Mar 30, 2011 2:52 pm 
Offline
Some call me a god

Joined: Sat Jan 19, 2002 7:00 pm
Posts: 1529
Location: Denton, Tx
hey mirageman, could you keep an eye out for an o2 sensor plug and about 8-10 inches of harness attatched and in good shape? mine fell apart due to a previous (to me ) oil leak and is currently unrepairable. just cut that sucker off the harness and mail it, ill pay you via cashiers check or money order as i hate paypal. pm me for more specifics. thanks.
Graham

_________________
If speed kills, then i shoulda been dead awhile ago. There is no such thing as "Too Much Power". There is no excuse for a lost race. Do you view the rev limiter as a fun limiter?or as a shift point? And we all know, more boost=more fun.


Top
   
PostPosted: Wed Jun 08, 2011 9:27 pm 
Offline
Generic cool guy

Joined: Thu May 26, 2011 8:42 pm
Posts: 483
Location: Puerto Rico
You think you can find me the little piece of the driver side side skirt?

_________________
95' Talon Tsi AWD- 11.7@118
DSM vs Sti: http://youtu.be/0rBoxKxQvNQ
89' Mirage AWD swapped- 11.5@128 stock frame turbo
1989 Mirage Turbo AWD 11.5 @ 127: http://youtu.be/AhtJuKT-c5U


Top
   
PostPosted: Thu Jun 09, 2011 9:44 am 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Quote:
You think you can find me the little piece of the driver side side skirt?

You would need to find someone parting an original turbo car for this.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Thu Jun 09, 2011 4:07 pm 
Offline
Newbie

Joined: Thu Dec 23, 2010 11:20 am
Posts: 27
Location: Winnipeg,MB Canada
92 colt 1.5L 12V distributor/coil assembly, seen any kickin around


Top
   
PostPosted: Thu Jun 09, 2011 5:47 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
There is a 92 sedan at one of the yards I'm going to tomorrow but I'm not sure if the distributor is still there or what kind of shape its in. $50 + shipping if it looks to be in good shape. Honestly on something like this it might pay to just buy a new one.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Thu Jun 09, 2011 9:13 pm 
Offline
Newbie

Joined: Thu Dec 23, 2010 11:20 am
Posts: 27
Location: Winnipeg,MB Canada
Quote:
There is a 92 sedan at one of the yards I'm going to tomorrow but I'm not sure if the distributor is still there or what kind of shape its in. $50 + shipping if it looks to be in good shape. Honestly on something like this it might pay to just buy a new one.
Ya I'd like to although getting one through napa on our shop account (at cost) is 340.00 with zero availability unfortunately. Unless there are other options known of?


Top
   
PostPosted: Sun Jul 03, 2011 1:01 am 
Offline
Spends Too Much Time Under The Hood

Joined: Sun Apr 03, 2011 5:21 pm
Posts: 262
Location: San Fernando Valley in California
SO i went to the local yards today and in one of them i seen a expo summit wagon. with all the front end on perfect shape too. For somebpody looking to swap to big brakes on there CSM. i was gona buy them but didnt know if i would get my money back on these since i have no use for them. As a matter fact there was another in the other yard so 2 sets of these knuckles and hubs everything was there. and still there as nobody pay them attention. If somebody needs these i ca get them off with extra $ for the work too. of remvoin


Top
   
PostPosted: Tue Nov 22, 2011 10:46 am 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Wed Jun 17, 2009 8:48 pm
Posts: 336
Location: San Diego, CA
Hey Chris, are there any teal hatches up there in the yards? I've been wanting to find one with colored bumpers but I haven't had any luck. Here's a pic for reference since I have the ugly black bumpers on mine.
Image




Thanks,
Steven

_________________
1991 Plymouth Colt - Project
2001 Audi S4- Stage 3 Daily Driver


Top
   
PostPosted: Tue Nov 22, 2011 12:46 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Actually there is a teal hatch at one of the yards with the painted bumpers. I'm sure shipping would be expensive though. I can probably grab them for $50 each.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Tue Nov 22, 2011 1:18 pm 
Offline
Member

Joined: Mon Jul 20, 2009 2:57 pm
Posts: 98
Location: Golden, CO
Looking for a blank rear center garnish / filler piece for a hatch.

Thanks!

_________________
1989 Mirage Turbo - 11.7@119


Top
   
PostPosted: Tue Nov 22, 2011 6:31 pm 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Wed Jun 17, 2009 8:48 pm
Posts: 336
Location: San Diego, CA
Thanks man that would be awesome. I've been wanting to get a set for quite some time now. How much do you think shipping would be to 32511? I probably wont be able to get the money to you until next week though.

_________________
1991 Plymouth Colt - Project
2001 Audi S4- Stage 3 Daily Driver


Top
   
PostPosted: Sun Dec 04, 2011 7:52 am 
Offline
Newbie
User avatar

Joined: Mon Sep 06, 2010 2:08 pm
Posts: 35
Location: cleveland ohio
Hey mirage man, I'm in need of a part. Maybe you can help. Not the coolant temp sensor itself but the connection that plugs into it. The piece from the wiring harness that has two wires going into it. If you can find one with about 6-8 inches of wire and is in good shape ill wire you some money and you can ship it to me I'm in fayetteville, NC. The engine in my colt is a 4g63. That's all I need is that little connection with extra wire. Mine is destroyed and car will not start. Thank you. You can email me at pdenny314@gmail.com

Pat...

_________________
1989 colt gt


Top
   
PostPosted: Wed Dec 28, 2011 3:40 pm 
Offline
CSM Junkie

Joined: Tue Jan 12, 2010 7:20 pm
Posts: 457
Location: Cleveland
looking for a 2g piston, got any?


Top
   
PostPosted: Thu Dec 29, 2011 12:02 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Quote:
looking for a 2g piston, got any?

I don't, sorry

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 175 posts ]  Go to page Previous 14 5 6 7 812 Next

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited