here is my intercooler. for upper piping im using a cx racing kit i had picked up earlier.
and my triple "f". i pulled it off a van.
| 4g61t.org http://4g61t.org/forum/ |
|
| laser rs-t http://4g61t.org/forum/viewtopic.php?f=64&t=34199 |
Page 4 of 6 |
| Author: | whe3ls [ Fri Dec 16, 2011 6:00 am ] |
| Post subject: | Re: laser rs-t |
im going to be ditching the 16g for a fp green. my room mate has one his selling. its an older non hta version. |
|
| Author: | xxNocturnalxx [ Fri Dec 16, 2011 9:29 am ] |
| Post subject: | Re: laser rs-t |
So is this for the Laser or Elantra? Any new pics? |
|
| Author: | whe3ls [ Fri Dec 16, 2011 9:50 am ] |
| Post subject: | Re: laser rs-t |
its going to be for the laser. Its still in pieces. im almost ready to mount the intercooler. And for the elantra i may have found a 2.0 for it. if i get it, its getting 1g manifold, big 16g, front mount, 90 ecu, maft, 510c injectors, fwd turbo fuel pump and stock turbo auto fpr. also the elantra may so get a 94ish galant auto put in it along with my summit front crossmember |
|
| Author: | whe3ls [ Fri Dec 16, 2011 10:23 am ] |
| Post subject: | Re: laser rs-t |
here is my intercooler. for upper piping im using a cx racing kit i had picked up earlier. and my triple "f". i pulled it off a van.
|
|
| Author: | xxNocturnalxx [ Fri Dec 16, 2011 1:02 pm ] |
| Post subject: | Re: laser rs-t |
Nice, Is that the same ofh that comes on the mighty max and d50? |
|
| Author: | whe3ls [ Sat Dec 17, 2011 12:45 am ] |
| Post subject: | Re: laser rs-t |
yes it is. it came out of a funky looking rwd van. the engine was under the front seat. it had a g63 in it. |
|
| Author: | whe3ls [ Sat Dec 17, 2011 9:52 am ] |
| Post subject: | Re: laser rs-t |
i also swapped in a 00-05 eclipse brake master cylinder. like this: 
|
|
| Author: | whe3ls [ Mon Dec 19, 2011 6:36 am ] |
| Post subject: | Re: laser rs-t |
i also found this write up. should work pretty nice with my manual harness. im using the auto harness i took apart to make a nice wiring harness. http://www.docstoc.com/docs/59176402/In ... CU-harness well not doing to be doing that ^. im just going to be doing the kiggly mod. |
|
| Author: | whe3ls [ Mon Dec 19, 2011 9:41 pm ] |
| Post subject: | Re: laser rs-t |
part one of the kiggly mod 
|
|
| Author: | whe3ls [ Tue Dec 20, 2011 9:19 pm ] |
| Post subject: | Re: laser rs-t |
part 2 
|
|
| Author: | CSM Shaun [ Tue Dec 20, 2011 9:23 pm ] |
| Post subject: | Re: laser rs-t |
Boo. Having been in a car with the Kiggly jank-mod I wouldn't bother. Just go straight for the Road Surge box. |
|
| Author: | whe3ls [ Tue Dec 20, 2011 10:14 pm ] |
| Post subject: | Re: laser rs-t |
we'll see how it turns out. it cost me about 10 bucks to this mod. pretty much done just need to wire it in to the main harness. 
|
|
| Author: | whe3ls [ Tue Dec 20, 2011 11:25 pm ] |
| Post subject: | Re: laser rs-t |
Transmision harness 
|
|
| Author: | whe3ls [ Sat Dec 24, 2011 12:12 am ] |
| Post subject: | Re: laser rs-t |
i fianlly got my gm maf back. i have a maft not sure where it went thou(found it)and i got my hallman manual controller i order too.   
|
|
| Author: | whe3ls [ Tue Jan 03, 2012 10:17 pm ] |
| Post subject: | Re: laser rs-t |
so i got the passager side of my intercooler piping done. i just need to have my blow off flange welded on. plus i picked up some pieces as well.   
|
|
| Page 4 of 6 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|