4g61t.org
http://4g61t.org/forum/

whe3ls's hyundai
http://4g61t.org/forum/viewtopic.php?f=64&t=33426
Page 13 of 19

Author:  whe3ls [ Tue Apr 30, 2013 10:04 am ]
Post subject:  Re: whe3ls's hyundai

Well the car has pissed me off. My spending has gone rouge. So the 1.8 is toast the axles are seized in the trans. Boy aren't cars fun.... I have ordered the peices to make my manifold and a down pipe. Going to earn some money this weekend for my steering wheel set up. And possible have enough for end clutchs for the f4a33 and new axles. Or ill try and buy my buddies s366 from him lol.

Author:  turbotom20g [ Wed May 01, 2013 4:48 pm ]
Post subject:  Re: whe3ls's hyundai

I say, balls to the walls! Drop the 4g63 and the turbo trans then have fun :wink:

Author:  whe3ls [ Fri May 03, 2013 4:39 am ]
Post subject:  Re: whe3ls's hyundai

That's the plan. I need to get rid of that shell anyways

Author:  whe3ls [ Fri May 10, 2013 6:11 pm ]
Post subject:  Re: whe3ls's hyundai

Well the laser is gone but before it went I pulled the engine and trans out.
Image
Anyone know which drivers side axle I can use if I use a dsm intermediate shaft?

Author:  turbotom20g [ Sat May 11, 2013 12:03 pm ]
Post subject:  Re: whe3ls's hyundai

Quote:
Well the laser is gone but before it went I pulled the engine and trans out.
Image
Anyone know which drivers side axle I can use if I use a dsm intermediate shaft?
All the axles on 1gs are all the same, I used 1g awd passenger side in my auto elantra.

Author:  whe3ls [ Sat May 11, 2013 2:42 pm ]
Post subject:  Re: whe3ls's hyundai

That's good to know what about drivers side

Author:  whe3ls [ Sun May 12, 2013 7:56 am ]
Post subject:  Re: whe3ls's hyundai

Got some parts in. Today ill post some cool pics later

Author:  turbotom20g [ Sun May 12, 2013 12:33 pm ]
Post subject:  Re: whe3ls's hyundai

Quote:
That's good to know what about drivers side
Fwd axle yes, AWD not to sure yet but I'm sure it's the same. I will be running a AWD driver side axle in my FWD 1g so I'll let you know how I made out.

Keep up the good work, all this work will pay off in the end I swear, to have a sleeper the honda boys will be all in a daze,lol.

Author:  whe3ls [ Mon May 13, 2013 5:00 am ]
Post subject:  Re: whe3ls's hyundai

<<<<< I just noticed it says csm junkie. It should be changed to j1 junkie lol



In na from the elantra was faster than most hondas, Lol. I enjoy messing with the subarus and the so called turbo neons aka srt 4s. I got some more parts in put my phone doesn't want to let me post them. I picked up 2 45 degree bend, 2 90s and a 2 foot straight peice of 2.5inch 304 stainless as well as a 1.5 90, and a 2 foot straight peice for the dumppipe. As well I also got 3 sch 10 1.5inch 90 so I can start building my manifold. And so I can run my nrg steering wheel that I still need to order I got a grant hub adaptor and an adaptor for 5 and 6 bolt steering wheels. And another 2-2.5 inch 90 coupler to replace the one I have that has a hole in it.


Just oredered some oem parts. Lower rad hose non ac heater duct and the 3 hole thermostat housing gssket

Author:  whe3ls [ Thu May 16, 2013 11:19 pm ]
Post subject:  Re: whe3ls's hyundai

Pretty manifold its not done yet.
Image

Author:  whe3ls [ Tue May 28, 2013 10:27 am ]
Post subject:  Re: whe3ls's hyundai

moved the car, time to do any drive train swap. yaya.

Author:  whe3ls [ Fri May 31, 2013 2:28 am ]
Post subject:  Re: whe3ls's hyundai

so today was a very busy day. so i started off today by moving my car into the shop today
Image
started pulling stuff off. pulled the hood off and alxes out
Image
Image
Image
pulling more stuff out
Image
dropped the motor out the buttom, raised the car up to pull it out
Image
Image
its out
Image
emepty
Image
pile of elantra parts
Image
oh hey i found my 4g63
Image
and phone died. :(
put i got the engine and trans in. transmission mount needs modded.

Author:  whe3ls [ Fri Jun 07, 2013 1:44 am ]
Post subject:  Re: whe3ls's hyundai

lets start off with the manifold
Image
Image
Image
Image
Image

last but not least
Image

Author:  ColtiXim [ Fri Jun 07, 2013 2:32 pm ]
Post subject:  Re: whe3ls's hyundai

Curious to see the result about your custom exhaust manifold, but i like the compact size and your hyundai project :D

Author:  xxNocturnalxx [ Sat Jun 08, 2013 12:42 am ]
Post subject:  Re: whe3ls's hyundai

Nice progress, slowly but surely getting there. :)

Page 13 of 19 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/