4g61t.org

it prolly is ive been thinking of getting one of these:

http://www.ebay.com/itm/MIT-ECLIPSE-DSM ... 67&vxp=mtr

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

That or a chinabay tubular would work. Don't be scared of the chinabay tubular, I have personally used them on a car that was driven lots and never once did a crack develop. Didn't even have a down pipe brace...

i have seen way too many of the cheap ebay tubular manifolds fall apart. i also spent about a hour cleaning out the elantra and pulling out the back seat.

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

im going to be replacing the stock bumper with a 94-95 bumper. they look way better. and easier to fit than the dsm bumper.

http://www.ebay.com/itm/FRONT-BUMPER-CO ... 2222792%26

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

My dsm bumper was easy to install, took me less than a half a hour.

i have been working on the elantra off and on the last week, when ever i can squeeze some time in. i have the starter wire ran the fuse box power wire ran. fuse box relocated. i just need a ground wire and a battery an i can see if anything works. lol

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

just bought a oem Hyundai trenisor for 22 bucks. just need the gates kit and wb

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

I used that same tensioner on my 61T, so much cheaper than the 63 version...but exactly the same .

_________________
Early 2000's: 1992 Summit sedan - 14.1 @ 100.9mph w/ 155/80 13s
2012: 1989 Dodge Colt GT Turbo - 14.9 @ 100mph, 10psi/s16G

the pink car. it just ran a 10.5


pulled out the tcu. im going to be getting a forcedfour shift box

took the center console out to clean it

the new power cable

the dash is back in.

ive turned the laser into a parts car.

the elantra 130k 4g63t. its going to be getting a new tbelt wb and maintenance pieces

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

That laser is clean too But this build is going to be awesome and pretty much what I wanted to do with mine. Keep up the good work

Its looks good , at one point it was hit in rear. The passenger door doesn't line up with the rear of the car. It has had the rear floor replaced.

I'm going to be ordering more parts next two weeks. Timing belt kit waterpump, end clutch kit, trans filter, cast t3 manifold. I'm also going to get a ngr steering with the two buttons and a forcedfour shift box for a poor man's paddle shifter.

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

I order some parts today. I picked up a 2g air filter adapter, gates timing belt kit, Bosch water pump, forced four lite shift box and a trans filter. I've made a bent in my parts list. Lol.

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

Well I have decided that I'm not going to get that cast t3 manifold. I'm going to be building a log style t3 manifold, with the help of a of a freind of mine. I'm mainly doing this so I can place the turbo so it clears the motor mount.

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

today i tested my chassis harness, since i moved the fused box. everything seams to work but i cant get the starter to engage. the starter wire goes to the starter but the neutral safey switch isnt hooked up to anything. i also have a bunch of parts next week

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff

Did you relocate the battery?

_________________
Good stuff - trucks bring it!