OOOH I found this on tooners...
There is definitely a better way to do it but that way works for sure.
| 4g61t.org http://4g61t.org/forum/ |
|
| Like Barack Obama said, It's time for a change... http://4g61t.org/forum/viewtopic.php?f=64&t=30952 |
Page 7 of 12 |
| Author: | CSM Shaun [ Thu Dec 02, 2010 11:55 pm ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
WOW Thank you very much man. So much easier when someone has the part numbers and everything... |
|
| Author: | whe3ls [ Fri Dec 03, 2010 12:19 am ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
Quote: WOW Thank you very much man. So much easier when someone has the part numbers and everything...
yep np. |
|
| Author: | CSM Shaun [ Fri Dec 03, 2010 1:36 am ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
Quote: ...I am interested to see how the sway bar mounts come out!
I am too.I have already started thinking about how I am going to attach my sway bar when I order the parts to make these bad dogs... |
|
| Author: | CSM Shaun [ Fri Dec 03, 2010 2:52 am ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
OOOH I found this on tooners... There is definitely a better way to do it but that way works for sure. |
|
| Author: | Kris_Mirage [ Fri Dec 03, 2010 8:58 am ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
Yeah thats the way I am going to be doing the swaybar mounts. But I am going to use a wheel stud and weld it on so the bolt wont flop around. And I have all the part numbers and everything back on page 5 
|
|
| Author: | Kris_Mirage [ Fri Dec 03, 2010 6:09 pm ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
Well I went and had Gary weld the TLE's up for me.  I forgot the swaybar mounts at home so I decided I would just do those. Ended up by screwing that all up and mounted the brackets wrong on BOTH sides(somehow confused the two sides)  By far one of the dumbest things I have done. So I will be redoing those hopefully tomorrow. So pissed! |
|
| Author: | whe3ls [ Fri Dec 03, 2010 9:19 pm ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
those welds look nasty |
|
| Author: | Kris_Mirage [ Fri Dec 03, 2010 10:11 pm ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
If your talking about the sway bar mounts, tell me about it lol worst welds I have done, the wire feed on this pos welder keeps getting jammed. Luckily(not really) I will be doing them again and hopefully have someone else do em, or get a new welder And if your talking about the TLE welds good or bad nasty? 
|
|
| Author: | whe3ls [ Fri Dec 03, 2010 10:21 pm ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
tle welds, i wouldnt trust that. seeing as its going to be a stress point |
|
| Author: | Kris_Mirage [ Fri Dec 03, 2010 10:33 pm ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
Quote: tle welds, i wouldnt trust that. seeing as its going to be a stress point
I think that the shadows and hot spots are playing a trick on you. They are like a stack of nickels all the way around. I wish I would have got better pictures of them. They will do fine no doubt in my mind. Here is some of his other work. 
|
|
| Author: | whe3ls [ Fri Dec 03, 2010 10:54 pm ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
maybe, it still looks like there are couple places with gaps in the welds |
|
| Author: | CSM Shaun [ Sat Dec 04, 2010 12:41 am ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
Quote: And I have all the part numbers and everything back on page 5
I will admit I did not read the entire thread.
|
|
| Author: | Kris_Mirage [ Sat Dec 04, 2010 7:18 am ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
Quote: Quote: And I have all the part numbers and everything back on page 5
I will admit I did not read the entire thread.
|
|
| Author: | Kris_Mirage [ Sun Dec 05, 2010 5:45 pm ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
Alright! Had a late night last night and didnt wake up till late. But I still finished everything I wanted to get done. Cut off my crooked brackets, cut some new ones. Fixed the welder and welded the new ones on. THE RIGHT WAY this time lol. Also mounted the rear and axle's and threw it up under the car. Mainly because I wanted to see it in its home, and the other 5% was to get the damn thing out my way lol Everything came out way better then I had hoped. And it looks damn good under the car! As for the sway bar mounts, I decided against using wheel studs and tacking them in. And just used dome grade 8 bolts instead. So if they for some reason shear off its a simple fix. No cutting, grinding, and welding. Also don't mind the rusty hardware. Going to get some new shiny stuff before its all said and done. Picture time!   And here is the mount.   If anyone has any questions about anything feel free to ask. And if you want more pictures of how it is set up I have plenty!! |
|
| Author: | Coltsfan [ Sun Dec 05, 2010 6:47 pm ] |
| Post subject: | Re: Like Barack Obama said, It's time for a change... |
 We don't have a regular thumbs up on here, so you get a "Way To Go" smiley. Have a bunch; they're free.
|
|
| Page 7 of 12 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|