Had an awesome time at English Racing. Car did well but ran out of fuel. Enjoy the pics.
| 4g61t.org http://4g61t.org/forum/ |
|
| Nocturnal's Mirage build. http://4g61t.org/forum/viewtopic.php?f=64&t=30221 |
Page 16 of 16 |
| Author: | xxNocturnalxx [ Tue Oct 13, 2015 8:23 am ] |
| Post subject: | Re: Nocturnal's Mirage build. |
Yes, I got the plug and play harness and SD kit from ECM, all plug and play. Just got to weld in the IAT bung. Next I ordered a GM flex fuel sensor off ebay, the stock return lines fit over the stock GM sensor barbs good enough to just splice and go, super easy. Have plans to go to English Racing to get everything dialed on the dyno by the end of the month. Will be tuned on E-85 and I'll just let the flex fuel do the rest below that content. |
|
| Author: | Kevo [ Tue Oct 13, 2015 3:20 pm ] |
| Post subject: | Re: Nocturnal's Mirage build. |
Quote: Yes, I got the plug and play harness and SD kit from ECM, all plug and play. Just got to weld in the IAT bung. Next I ordered a GM flex fuel sensor off ebay, the stock return lines fit over the stock GM sensor barbs good enough to just splice and go, super easy. Have plans to go to English Racing to get everything dialed on the dyno by the end of the month. Will be tuned on E-85 and I'll just let the flex fuel do the rest below that content.
Awesome, thanks for the info! I've been running E85 on my Evo's but have always just gotten them tuned on winter blend to be safe. This is a much safer sounding setup and sounds easy enough to install.
|
|
| Author: | xxNocturnalxx [ Wed Oct 28, 2015 5:58 pm ] |
| Post subject: | Re: Nocturnal's Mirage build. |
Had an awesome time at English Racing. Car did well but ran out of fuel. Enjoy the pics.
|
|
| Author: | xxNocturnalxx [ Wed Oct 28, 2015 6:41 pm ] |
| Post subject: | Re: Nocturnal's Mirage build. |
  
|
|
| Author: | antilag_200 [ Thu Oct 29, 2015 9:33 am ] |
| Post subject: | Re: Nocturnal's Mirage build. |
that is awesome man 
|
|
| Author: | xxNocturnalxx [ Thu May 05, 2016 12:28 pm ] |
| Post subject: | Re: Nocturnal's Mirage build. |
Replaced my leaky hotside with a less leaky one, FYI it's not a good idea to weld an internal gate shut by just the arm, you'll want to weld the flapper too or spring load the flapper arm otherwise it's pretty much impossible to get it to seal properly with thermal expansion characteristics. The car spools noticeably better now but we also changed the manifold and wastegate too so it's hard to tell exactly what was causing the lag. The car should perform much better on the track and dyno now. I think she could be good for 440-450 with the changes made with a much better power curve. Debow aka Tony let me borrow his manifold and hotside for now as the ERL I got just didn't want to work with my setup  .  
|
|
| Author: | wrx110487 [ Fri May 06, 2016 12:12 am ] |
| Post subject: | Re: Nocturnal's Mirage build. |
Looks good. Nice and clean engine bay |
|
| Page 16 of 16 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|