4g61t.org

can someone please tell me what camber correction kit or bolts I should use. from where, what brand, part #s & $$$. its for the GVR4 hubs/knuckles/rotors that I'm putting on my Mirage with KYB GR2s. also, do you order the kit or bolts for a GVR4 or a Mirage Turbo? thanks guys.

-vic

_________________
I'd rather have it & not need it, then need it & not have it.

You don't necessarily need to use any kit for camber correction. You can just use smaller bolts and nuts for the bottom strut mounts on to the knuckle. I just used the 14mm bolts and nuts instead of the 17mm. Just push the hub assembly towards the inside of the car to make the camber more negative and then torque down the nuts and bolts.

_________________
Ben Kriegsfeld
AGP Turbochargers
http://www.agpturbo.com

The bolts are available from Napa or Carquest. Just ask for the camber correction kit for a '90 Eclipse. You will need two bolts. One for each side.

Or you can just do what Ben suggested.