| 4g61t.org http://4g61t.org/forum/ |
|
| HYUNDAI SONATA MANIFOLD? http://4g61t.org/forum/viewtopic.php?f=6&t=4991 |
Page 1 of 1 |
| Author: | 89XZOST [ Sun Aug 17, 2003 11:39 pm ] |
| Post subject: | HYUNDAI SONATA MANIFOLD? |
I just went to a local yard and found a intake manifold off a Hyundai Sonata.....Will this fit my 63t in place of my cyclone intake? If so what else can be used?.....I also aquiered two IC's, one off a SAAB (Wich is a high volume side mount IC) and the other off a Ford Probe (Wich was a front mount style simalar to a starions'. Any suggestions on wich to use? |
|
| Author: | Gage [ Mon Aug 18, 2003 12:16 am ] |
| Post subject: | |
yes the intake manifold will fit as for the IC i would use the probe rather that the sabb one |
|
| Author: | xlr8 [ Mon Aug 18, 2003 1:03 am ] |
| Post subject: | |
Nobody can accurately tell you whether the Sonata manifold will fit unless you can tell us what year Sonata it is from. ie: only some Sonatas use the DOHC 4G63B. |
|
| Author: | Berserko [ Mon Aug 18, 2003 3:14 pm ] |
| Post subject: | |
XLR8: is right more product specific information is needed. Some came with a SOHC 4g64 and it will NOT fit. If it uses a DOHC 4g63 it should fit without issue.... |
|
| Author: | 89XZOST [ Mon Aug 18, 2003 11:50 pm ] |
| Post subject: | SONATA MANI...... |
I looked for an engine code and coulnd't find one. I know it's an early model (probably off a 90-91). The engine was a DOHC and looked exactly like 63t. The only difference was that the throttlebody comes with an attatched plumbing (not detatchable like ours). |
|
| Author: | xlr8 [ Tue Aug 19, 2003 1:14 am ] |
| Post subject: | |
Sounds like the right model then. From memory the engines are coded comething like G4CP (4G63) and G4CN(4G61-Elantra.) |
|
| Author: | Berserko [ Tue Aug 19, 2003 11:58 am ] |
| Post subject: | |
and G4CS for a 2.4L Sonata |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|