| 4g61t.org http://4g61t.org/forum/ |
|
| mpi relay http://4g61t.org/forum/viewtopic.php?f=6&t=40829 |
Page 1 of 1 |
| Author: | boostjunkie92 [ Sun Oct 09, 2016 10:16 pm ] |
| Post subject: | mpi relay |
im looking for confirmation on if i need to swap out my existing mpi relay when using a 91+ dsm ecu currently i have the stop 1.6L turbo mpi relay installed. will this cause problems with my ecu or am i ok? |
|
| Author: | boostjunkie92 [ Mon Oct 10, 2016 8:34 pm ] |
| Post subject: | Re: mpi relay |
Out of everyone here who's done a 4g63 swap nobody can confirm if they used the dsm or csm mpi? |
|
| Author: | LILEVO [ Mon Oct 10, 2016 10:22 pm ] |
| Post subject: | Re: mpi relay |
If it plugs in and works then don't worry about it. They aren't expensive. Find a dsm one just in case. Look up any of the wiring diagrams on my site. Find the MPI relay page. Print out both side by side. Compare. |
|
| Author: | boostjunkie92 [ Tue Oct 11, 2016 5:23 am ] |
| Post subject: | Re: mpi relay |
Thank you. Well hopefully I'll be doing a first start today I'm trying to get this done before the rain hits (a week or less). That's why I'm trying to sort out all my unforeseen issues before I get to them. As of right now the stock turbo csm mpi relay, power transistor, coil and resistor pack are being used. |
|
| Author: | drcolt2000 [ Sat Oct 29, 2016 9:45 pm ] |
| Post subject: | Re: mpi relay |
Mine is running stock relay. 91+ motor . All I changed over was the coil and power transistor for a 90. The TB was whatever I had in my parts bin. I threw in an old used 14b. Cranked it over and hoped for the best! I had no motor in my colt when I got it and I had to sort out the hacked wiring harness in the engine bay. I had no idea what connector did what. In the end. It all works out. One piece at a time. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|