| 4g61t.org http://4g61t.org/forum/ |
|
| mounting the 1g smic http://4g61t.org/forum/viewtopic.php?f=6&t=40782 |
Page 1 of 1 |
| Author: | boostjunkie92 [ Tue Sep 13, 2016 9:53 pm ] |
| Post subject: | mounting the 1g smic |
From what i hear and read, the 1g fmic and pipes mount pretty closely to the 1g mounting. Ive cut a hole for the uicp but the lower pipe is giving me trouble. the outlet on the intercooler will not fit around the inside of the frame thus i cannot bring the intercooler high enough for the lower pipe to reach, my only options that i can see is to remove the outlet and reweld it with a wider angle so the outlet can come up around the frame or find a longer hose and mount the intercooler very low which looks like it would be prone to scraping on the ground...anybody have experience getting the 1g setup to work? |
|
| Author: | drcolt2000 [ Fri Sep 23, 2016 10:17 pm ] |
| Post subject: | Re: mounting the 1g smic |
I did use a dsm ic for a short while, i have to dig up some old pics. I found it heatsoaked easily. I even drilled out the bumper to allow more air to it. Then i just went to a starion fmic. Perfect size for my setup at the time. |
|
| Author: | boostjunkie92 [ Sat Sep 24, 2016 6:32 pm ] |
| Post subject: | Re: mounting the 1g smic |
thanks i gave up and went ahead and ordered the PR 1g fmic kit |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|