4g61t.org

Is the 1ga rear mount as same as the '61t? Reason I'm asking is mine is so chewed up that I'm not sure if the centre of it is supposed to be slightly offset to the bottom(where the bolt goes through)? I want to fill it with windshield urathane again but thot i'd start with a fairly decent one first.

Completely different roll stop. The 92-95 Elantra one will work or any 3g csm though, doesn't have to be turbo. I have a few here, $10 + shipping for one.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

Great-I'll take one if you ship to Canada, if not I can get my buddies P.O. box # in NY.

I can ship to either address but NY will be a lot cheaper for sure.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

K you got PM!

Got it-thanks 89Mirageman!! Its sweet that the Elantra ones are filled from factory. Just waiting for paint to dry and it'll be in the car.

[URL=http://s685.photobucket.com/user/q ... .jpg[/img][/url]

Actually there are quite a few differences in the elantra parts vs the Mitsubishi ones. It seems in most cases the Hyundai parts are built a little better from what I've seen.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

true! most of the dsm guys are scared to use hyundai stuff over their mitsu 4g63s like sensors, alternators, etc. I guess most of them don't know about how they did pretty good quality on all the copies they made from mitsubishi, I would say even better than mitsubishi...

_________________
91' Mitsubishi Colt 4G67T FWD "The Minion" - 12.26@118
94' Mitsubishi Galant GS 4g63 Swap "White Unicorn"
95' Eagle Talon Tsi FWD "Ernie's car" - 13.92@104 *Rest In Parts*

I first noticed this when I tried to swap an elantra clutch/brake pedal into my last Colt because I couldn't locate the needed csm parts at the time. The bar on the brake pedal was about 1.5" longer so it had to be modded to work but all of it was built so much beefier. The smooth black valve covers are the same way. You hardly ever see those crack or the threads stripped like you do with the weaker Mitsu ones.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual