4g61t.org

Hey guys....I would really appreciate the help here!!! I am on hometime, trying to install my 14b turbo finally. I went to get copper washers the other day, then I LOST THE ONE BOLT TO FINISH THIS. It's the bolt that tightens the oil feed line to the turbo.

I am in a huge time crunch and need this part FAST.....any ideas where to find one? Does anybody have one? I will pay huge for it.

_________________
Good stuff - trucks bring it!

most companys call it a banjo bolt... need to check around but looks like most people get it from the dealership... or wrecking yard..

M12-1.25x23 is the size if u can find one at a hydrolic shop.. it should be pn/ MS650013

I have 1 here and im sure alot of others do also.. and shipping isnt all that fast unless u pay out the whazzooo.. so I would try dealership first. then a place the deals in making hydrolic lines and see if they have one.. final resort would be to have 1 overnighted..


Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

Thanks for the info, Steve. I would like to find one laying around, and since I come home only every two months, I don't have the time to go looking for one.

I gast at the thought of looking at all the hardware stores. I only need this bolt....lost it tonight, been waiting eight months to do this installation. I really shot myself in the foot this time...lol

_________________
Good stuff - trucks bring it!

_________________
08 silverado max
91 Eagle Summit 4g63t swapped

I checked with all of them, extremepsi taking the longest to ship....5 days from the east coast. The other place wasn't available for calls till Monday.

Some guy on Craigslist just hit me up with the stuff I need....like a rabbit in a hat or something like that.
Thanks for all the suggestions and bolt size info!!!

_________________
Good stuff - trucks bring it!