4g61t.org
http://4g61t.org/forum/

How-To / Walkthrough DVD Request
http://4g61t.org/forum/viewtopic.php?f=6&t=20990
Page 1 of 2

Author:  LILEVO [ Tue Apr 10, 2007 8:04 pm ]
Post subject:  How-To / Walkthrough DVD Request

Use this thread to bounce ideas off of each other as far as what you would like to see on a walk-through DVD.

I really can't think of anything since I'm pretty seasoned with Mirages/4G63s and most of it comes naturally. The new guys might have some good ideas about lessons they'd like to see.

Author:  SLobra [ Wed Apr 25, 2007 12:37 am ]
Post subject: 

I'm just starting to do a 4g63t swap and this would be a great! I would include some wiring harness explaination like what to hook up where and vacuum hose hook ups. I know some guys piece together parts instead of buying a donor car. I bought the wiring harness dvd and it was a big help. Count me in for buying this one

Author:  socalmirageturbo [ Tue May 15, 2007 1:18 am ]
Post subject:  request

A complete step by step for removal of a 4g61t and complete install of the 4g63t down to the little things like clutch install and getting it running with right ecu and maf.

The point is to show what to look out for, providing clear insight and tricks to get it all singing.

Id even add, some tidbits like why pick the 1G 4g63t over other years.
What are the upgrade paths for adding turbo.
What things to look out with ECU's - cap
DSM link installation
etc.

A COMPLETE guide if you will.

Id certainly buy it in a heart beat.

Author:  89coltgt [ Tue May 15, 2007 1:58 am ]
Post subject: 

The video should be called "4g63t powered c53's for idiots" :P j/k

Author:  CaptainTonus [ Tue May 15, 2007 2:49 am ]
Post subject: 

Quote:
The video should be called "4g63t powered c53's for idiots" :P j/k
More like "How to Build a Deathtrap, For Dummies" :lol:

Author:  Summit91 [ Thu May 17, 2007 9:08 am ]
Post subject: 

You should make a DVD that shows how to swap a 4g63t into a colt or mirage (4g15) from start to finish. That would help out alot of people!

Author:  kenc15 [ Thu May 17, 2007 10:35 am ]
Post subject: 

Quote:
You should make a DVD that shows how to swap a 4g63t into a colt or mirage (4g15) from start to finish. That would help out alot of people!

that's what the dvd is about :rolleyes:

Author:  Summit91 [ Fri May 18, 2007 9:35 am ]
Post subject: 

Quote:
Quote:
You should make a DVD that shows how to swap a 4g63t into a colt or mirage (4g15) from start to finish. That would help out alot of people!

that's what the dvd is about :rolleyes:
haha my bad guess i should of read it better!

Author:  Evotistical [ Tue Jun 26, 2007 5:28 pm ]
Post subject: 

I have my money waiting for the dvd that features the complete 4g63t fwd swap into a fwd 1.5 car. :wink: 4g61t guys have just about all the info they need as the 2.0 motor just swaps in. They just need to lable theyre connections for reconnect. :finga:

Author:  LILEVO [ Tue Jun 26, 2007 6:56 pm ]
Post subject: 

That's what my wiring DVD covers. 1.5L to 2.0L wiring swap. Mounts and physical swapping could be covered in a 5 minute DVD :-P

http://lilevo.com/html/body_wiringdvd.html

Author:  POOKERS [ Tue Jul 24, 2007 2:02 pm ]
Post subject: 

just an idea.....................an AWD hatch swap would be nice

Author:  gevo [ Tue Jul 24, 2007 3:25 pm ]
Post subject: 

Quote:
That's what my wiring DVD covers. 1.5L to 2.0L wiring swap.
Would the wiring for the 1.3 4g13 be similar to that of the 1.5?

Author:  Evotistical [ Tue Jul 24, 2007 8:27 pm ]
Post subject: 

It Should be exactly the same! I don't see why there would be any difference.

Author:  Flying Eagle [ Tue Jul 24, 2007 9:17 pm ]
Post subject: 

1.3L and 1.5L as long as they were both EFI, will be wired the exact same, even the block and most bits are the same. I think the only difference was the block bore and or stroke. Saved you more on gas, but that is not what the DVD will be about. :lol: 8)

Author:  Legolas337 [ Wed Jan 09, 2008 5:42 am ]
Post subject: 

Pulling out the old 1.5 harness and where things go and what to take out (wire wise). The A/C hookups and what would be needed to get that to work. Some pictures with the plugs and wires with labels and arrows would really help!!!! That way i could bring the laptop out and use it as reference a lot easier. If you do decide to redo your dvd walkthrough let me know i might have some pics for you to use. As your current walkthrough is great, it doesnt come near to answering where most of the wires get hooked up for accesories. Still a great help though.

Page 1 of 2 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/