| 4g61t.org http://4g61t.org/forum/ |
|
| problem with valve http://4g61t.org/forum/viewtopic.php?f=6&t=14770 |
Page 1 of 2 |
| Author: | 61tuner [ Sat Aug 06, 2005 8:46 pm ] |
| Post subject: | problem with valve |
hai, i m new here..i seem to have a problem when everytime i started my 61 engine, the valve tappet seems to make a weird sound like (tet..tet..tet) and after about 1 minute its gone...sorry if my english sound terrible...And what is the differrence between the 61 and 61 RS engine?? |
|
| Author: | The Ethereal [ Sun Aug 07, 2005 4:47 am ] |
| Post subject: | |
Looks like your hydraulic lash adjusters are a bit gunked up. Try a different weight or brand of oil and look if it goes away. If it only makes that clicking when cold, and it doesn't become worse, you shouldn't worry about it. Where the Helligkeit does a 4G61 RS engine came out of? 
|
|
| Author: | 61tuner [ Mon Aug 08, 2005 8:08 am ] |
| Post subject: | |
eemm hydraulic lash adjusters ??where are these thing located?? by the way,, the 4g61t RS usually use a different kind of intake manifold not the CYCLONE IM but the ECI MULTI IM.. bcause here in malaysia the 61t halfcut came with two different type of engines...that i believe to be the RS and non RS version... |
|
| Author: | The Ethereal [ Tue Aug 09, 2005 5:19 am ] |
| Post subject: | |
The lash adjusters are inside the cylinder head. |
|
| Author: | PaulMezz [ Tue Aug 09, 2005 9:32 am ] |
| Post subject: | |
http://www.ce.rit.edu/~mezz/gallery/lifters In there Look at the last picture. The left side still has the rockers on and the right side has them removed exposing my nice new liifters |
|
| Author: | xlr8 [ Tue Aug 09, 2005 11:04 pm ] |
| Post subject: | |
Must.........get.........new...........lifters.......this.........ticking.........is........driving..........me............crazy............every............morning. My Lantra's 4G67 does the same damn thing, although it has gotten quite bad where it ticks for a good 5-10 minutes driving on a cold morning. Letting the engine warm up before driving just makes it worse  Engine oil flush has made it better but I just need to bite the bullet and get some new 3G lifters with the larger oil hole. Problem is they are expensive here in AU and there are 16 of them.
|
|
| Author: | Flying Eagle [ Wed Aug 10, 2005 5:08 am ] |
| Post subject: | |
If I hadn't needed mine I would sell them to you, but send Hybrid Connection a shout, or better yet call them. They did a group buy on this stuff and shipping for such a small box shouldb't be too bad. I would suggest having Hybrid send the goods directly from their end though and not the manufacturer (we had a little trouble their with the paperwork at customs). Food for thought. *EDIT* Just received my government money back! UPS will get to hear why they must pay me back now. |
|
| Author: | PaulMezz [ Wed Aug 10, 2005 9:59 am ] |
| Post subject: | |
if you tick, try 15w-50 oil. Thats what I run and it calms it down some |
|
| Author: | 61tuner [ Wed Aug 10, 2005 11:25 am ] |
| Post subject: | |
emmm i C..i am using semi-synth 15W-40 oil ,,every morning i start the engine, it ticks in about a minute...when the engine warmed up a little, the tick disappears ( but if u put your ears closer to the engine, you could hear the tick is still there). |
|
| Author: | The Ethereal [ Wed Aug 10, 2005 11:46 am ] |
| Post subject: | |
The try a thinner oil, like 5W-40 and look what happens. |
|
| Author: | 61tuner [ Wed Aug 10, 2005 11:54 am ] |
| Post subject: | |
ok ,,, i'll try ...thanks 
|
|
| Author: | 61tuner [ Fri Sep 02, 2005 6:35 am ] |
| Post subject: | |
What if i clean all the hydraulic lifters....will it make any different??? or i have to change all lifters??what about using oil flush,, will it works? |
|
| Author: | The Ethereal [ Fri Sep 02, 2005 2:08 pm ] |
| Post subject: | |
You can try cleaning them w/ ATF or Diesel fuel one by one by soaking them in that stuff. |
|
| Author: | 61tuner [ Fri Sep 02, 2005 9:09 pm ] |
| Post subject: | |
Thanks for replying.... I lived in a hot climate country ,,, therefore i cant use thinner oil...that is why i have to find other way to solve the problem... i m going to clean all hydraulic lifters and use IDEMITSU 20w 50 oil because my mechanic said that turbo engines are not suitable with thinner oil especially in hot climate country..... thanks again ethereal |
|
| Author: | Navin [ Mon Oct 03, 2005 11:00 pm ] |
| Post subject: | |
dear all, mine to having same problem, but mine the duration is longer,, sometimes even car go up to 30mins, while im driving also car hear the sound, im not sure what type oil i used previously, but im going for service next week, maybe can recomend what kind of type of oil so that i may try. Note: Me too living in hot climate.
|
|
| Page 1 of 2 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|