yes I think that is what they were or maybe it is the older one the 300c
but either way they are still pricey , jsut do the MSD Gm coil packs, they are working great in my race car and I get no blow out at even 39 psi
| 4g61t.org http://4g61t.org/forum/ |
|
| Individual coils for 4G63T http://4g61t.org/forum/viewtopic.php?f=6&t=13441 |
Page 1 of 1 |
| Author: | cheeks [ Wed Apr 06, 2005 5:30 am ] |
| Post subject: | Individual coils for 4G63T |
I have seen pictues but need details of which coils to use to set up a individual coil over plug arrangement similar to the SR20DET. Better spark, no coil pack, no leads.. |
|
| Author: | antilag_200 [ Wed Apr 06, 2005 7:12 am ] |
| Post subject: | |
I think the 300m COIL are the ones that you need but I could be mistaken, why are you changing your calls the stock ones have been proven in the 10s before, or you could just get a plug and play kit from buschur or dsmparts I think they retail for like 400 bucks good luck |
|
| Author: | cheeks [ Wed Apr 06, 2005 12:36 pm ] |
| Post subject: | |
Have a wrecked SR20DET here and can have the coils for nothing if they will work. Relatively easy mod that will save me money down the track as well as improve spark quality. |
|
| Author: | DarkHorse [ Wed Apr 06, 2005 1:11 pm ] |
| Post subject: | |
Quote: I think the 300m COIL are the ones that you need ....
whats this? chrysler 300m? anymore info?~joe |
|
| Author: | antilag_200 [ Wed Apr 06, 2005 1:56 pm ] |
| Post subject: | |
yes I think that is what they were or maybe it is the older one the 300c but either way they are still pricey , jsut do the MSD Gm coil packs, they are working great in my race car and I get no blow out at even 39 psi
|
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|