Slap on a DOHC head
| 4g61t.org http://4g61t.org/forum/ |
|
| No Replacement for Displacement http://4g61t.org/forum/viewtopic.php?f=6&t=13380 |
Page 1 of 1 |
| Author: | HondaHunter [ Fri Apr 01, 2005 12:19 am ] |
| Post subject: | No Replacement for Displacement |
Ok since my 89 Colt GT 4g15 automatic went "south" on me im gonna venture a new path and resurect a Pheonix from the ashes of my 4g15. Since I Have a 4G64 SOHC 8v block in perfect running condition in my garage i plan on just putting that together and dropping that in for replacement for my 4G15. First order is removing the balance shaft since it went out of wack and enlongated the bearing hole in the block. But I do know for certain I will need the following parts for this: * FWD Intake manifold * SOHC 4G64 injectors * SOHC 4G64 distributor * SOHC 4G64 ECU * SOHC 4G64 MAF Now the mounting is somewhat shady. Do i use the 4G15 or 4G6X CSM front timing mount? And I take it I will need the 4G6X block mounts and 4G61 "roller" mounts to the front crossmember to get it properly aligned(sp?) - Paul |
|
| Author: | colt-r-old [ Fri Apr 01, 2005 1:52 pm ] |
| Post subject: | |
Slap on a DOHC head
|
|
| Author: | Berserko [ Sat Apr 02, 2005 8:36 am ] |
| Post subject: | |
Paul, Just get the engine in place with DOHC lower/tranny mounts in place and see where that leaves you see what compatible with going there.. |
|
| Author: | The Ethereal [ Sat Apr 02, 2005 1:35 pm ] |
| Post subject: | |
AFAIK you'll have to use a 4G6x timing belt mount. The diesel engines (4D6x) that came in the CSMs have a head design similar to the SOHC heads and still have that mount. |
|
| Author: | HondaHunter [ Mon Apr 04, 2005 3:13 am ] |
| Post subject: | |
ok so i also need to use the automatic tranny mount for a DOHC equipped CSM or just use my stock km-171/4g15 tranny mount? 
|
|
| Author: | The Ethereal [ Mon Apr 04, 2005 3:40 am ] |
| Post subject: | |
Quote: ok so i also need to use the automatic tranny mount for a DOHC equipped CSM or just use my stock km-171/4g15 tranny mount?
Uh... ask Berserko!  I remeber faintly that the 4G64 SOHC bolts to stock 4G15 tranny mounts. I think it was Steward Dibbs who did that.Edit: just scroll down so Paul's above post is in the center of the screen. You can see SIX bunnies hopping around. Darn, this is annoying. Anybody got a sawed-off? 
|
|
| Author: | Berserko [ Mon Apr 04, 2005 6:08 am ] |
| Post subject: | |
I think you'll want the 4g6X tranny mount get it from your local elantra at the wrecker. Can have it out in like 10 mins.. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|