4g61t.org
http://4g61t.org/forum/

AWD fuel filler
http://4g61t.org/forum/viewtopic.php?f=57&t=39859		 Page 1 of 1
Author:  LILEVO [ Sat Jan 24, 2015 7:03 pm ]
Post subject:  AWD fuel filler
Finally got around to cleaning up my fuel tank area after all the years.

I found the GVR4 MB678633 Fuel filler hose to be a perfect fit when using a stock AWD / GVR4 fuel tank. It has a perfect 90 degree bend and can mate up to the Mirage fuel filler hard pipe and door area. There aren't many of these left from Mitsu.

Image
Author:  Flying Eagle [ Sat Jan 24, 2015 7:09 pm ]
Post subject:  Re: AWD fuel filler
Great post.

Surprised many are left, from MMNA.

Wonder what the supply is like from JDM and Asia/East(UAE).
Author:  LILEVO [ Sat Jan 24, 2015 7:19 pm ]
Post subject:  Re: AWD fuel filler
I actually ordered two of the 1 foot long straight stubs for the 89-92 Mirage just in case also.

Those were still available too surprisingly and took a couple weeks to get here from Japan.

Didn't need them, but someone might in the future for a nice straight piece.

Image

Image
Author:  Flying Eagle [ Sat Jan 24, 2015 11:27 pm ]
Post subject:  Re: AWD fuel filler
Yeah, you would have seen in my build thread that I just had mine off.

Slightest of cracks start near the edges, but nothing wrong with the general integrity.

I also made sure to re-install them, with the heater pre-heating them, before being plugged in.

I should stock up on some potentially obsolete items.

I have a few, well, more than a few.
Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/