4g61t.org

Specializing in the 3g CSM
It is currently Sat Apr 10, 2021 6:15 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Trans cable help!!
PostPosted: Wed Oct 29, 2014 1:21 pm 
Offline
Newbie

Joined: Sun Sep 15, 2013 5:16 pm
Posts: 23
Location: Cape Coral fl
Ok guys I have been looking around and I can't seem to find what I am actually looking for, I am running an awd transmission out of a 92 talon in my 89 4g63 swaped mirage. I have the factory turbo mirage shifter cables and shifter base. But I am wondering what bracket I need for on the transmission. I have seen where they talk about useing the factory turbo shift levers but I don't remember haveing to run them on my old colt when I had it 6 or 7 years ago. I just know there are a couple diffrent combinations of brackets out there. But I was wondering if some one could let me in on what one would be the correct one I use. Pictures would be helpful to..


Thanks


Top
   
 Post subject: Re: Trans cable help!!
PostPosted: Wed Oct 29, 2014 9:38 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7513
Location: Stantonsburg, NC
You need the bracket that bolts to the trans case that holds the cables on, the lever that is bolted on and the one that is welded on. I did a write-up in the archive on how to swap these out. These parts need to come from any 3g csm with a manual trans, turbo or na does not matter.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
98 Mitsubishi Mirage DE Coupe 1.5/auto


Top
   
 Post subject: Re: Trans cable help!!
PostPosted: Thu Oct 30, 2014 11:29 am 
Offline
Newbie

Joined: Sun Sep 15, 2013 5:16 pm
Posts: 23
Location: Cape Coral fl
Yea I have seen that but I never had to do that on my old setup, was wondering if anyone else is running the awd factory trans levers and not swapping them out?


Top
   
 Post subject: Re: Trans cable help!!
PostPosted: Thu Oct 30, 2014 2:30 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7513
Location: Stantonsburg, NC
Not that I know of. To my knowledge you have to swap the levers to run the stock csm shifter and cables. Were you using a dsm shifter and cables on your last swap?

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
98 Mitsubishi Mirage DE Coupe 1.5/auto


Top
   
 Post subject: Re: Trans cable help!!
PostPosted: Thu Oct 30, 2014 4:34 pm 
Offline
Newbie

Joined: Sun Sep 15, 2013 5:16 pm
Posts: 23
Location: Cape Coral fl
I don't believe I was, but if I was to run the dsm shifter base and cables do I not need to modify the the shifter arms?


Top
   
 Post subject: Re: Trans cable help!!
PostPosted: Tue Jan 20, 2015 1:07 pm 
Offline
Member

Joined: Fri Dec 15, 2006 9:36 pm
Posts: 194
Location: connecticut
Quote:
I don't believe I was, but if I was to run the dsm shifter base and cables do I not need to modify the the shifter arms?
I used the CSM setup and just cut the shift arm of the shifter rods on the original transmission. I then removed the ones on the AWD transmission and welded the CSM parts to the AWD shift rods.
Mark


Top
   
 Post subject: Re: Trans cable help!!
PostPosted: Tue Jan 20, 2015 3:12 pm 
Offline
Some call me a god
User avatar

Joined: Sat Jul 07, 2007 10:40 pm
Posts: 1033
Location: Lyndhurst,VA
Easiest way to do it without cutting and welding. Note you still need the up/down CSM lever that bolts onto the trans though.

http://www.4g61t.org/forum/viewtopic.ph ... it=shifter

just noticed we bumped an old thread.... :partyman:


Top
   
 Post subject: Re: Trans cable help!!
PostPosted: Tue Jan 20, 2015 3:50 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7513
Location: Stantonsburg, NC
No biggie, I'm sure this info will help someone else who searches in the future. I can't imagine trying to bend that thick shift lever with a pair of visegrips but it looks like it worked out well. It's always nice seeing people doing things differently.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
98 Mitsubishi Mirage DE Coupe 1.5/auto


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited