4g61t.org

Specializing in the 3g CSM
It is currently Mon Dec 09, 2024 12:03 pm

All times are UTC-05:00




Post new topic  Reply to topic  [ 22 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Wed Mar 27, 2013 3:33 am 
Offline
Member
User avatar

Joined: Wed Feb 13, 2013 4:42 am
Posts: 94
Location: Ft. Stewart, GA
After searching i just want to make sure I am correct.

Alright my car "89 colt" has a AWD swap from a 91 gsx. So i am under the assumption that any 1g AWD suspension/coilovers will work?
& for the fronts since everything is almost untouched i can just pick up any suspension items for my 89 & it will bolt on correct?

& for tires i plan on just using the stock 1g wheels & running 205's or possibly picking up a set of wheels 15x6 or 15x7 with a -0 or -12 off set & running something a little wider.

Just looking for opinions of what would work best for me. I am currently deployed & am trying to get everything together before i return.


Thanks


Top
   
PostPosted: Wed Mar 27, 2013 6:31 am 
Offline
Some call me a god
User avatar

Joined: Mon May 18, 2009 8:53 pm
Posts: 1494
Location: Seattle, WA
If you want to push wider you should be able to get away with 225/50s on a 15x7 but i wouldn't go lower than +32 offset. My future set-up is going to be 205/50s on 15x6.5 +38 I've calculated it out to be fairly flush.

Editing this because I ended up doing 225/50 on 15x7 +34 , rear is flush, front sticks out a tad.

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R


Last edited by xxNocturnalxx on Tue Jul 30, 2013 5:56 am, edited 1 time in total.

Top
   
PostPosted: Wed Mar 27, 2013 7:25 am 
Offline
Member
User avatar

Joined: Wed Feb 13, 2013 4:42 am
Posts: 94
Location: Ft. Stewart, GA
Quote:
If you want to push wider you should be able to get away with 225/50s on a 15x7 but i wouldn't go lower than +32 offset. My future set-up is going to be 205/50s on 15x6.5 +38 I've calculated it out to be fairly flush.
Alright thanks, i thinking of 225's originally but i didn't know how well they would fit & if i would get rubbing problems. I was originally going to run my rx7 wheels but they are 16x7 & +50 offset


Top
   
PostPosted: Wed Mar 27, 2013 10:18 am 
Offline
2nd Banana
User avatar

Joined: Wed Dec 28, 2005 1:16 pm
Posts: 9369
Location: San Diego, CA.
Quote:
Quote:
If you want to push wider you should be able to get away with 225/50s on a 15x7 but i wouldn't go lower than +32 offset. My future set-up is going to be 205/50s on 15x6.5 +38 I've calculated it out to be fairly flush.
Alright thanks, i thinking of 225's originally but i didn't know how well they would fit & if i would get rubbing problems. I was originally going to run my rx7 wheels but they are 16x7 & +50 offset
The RX7 wheels are actually 16x8"

225/50 might still rub, unless you do some fender-rolling.

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus


Top
   
PostPosted: Wed Mar 27, 2013 10:57 am 
Offline
Member
User avatar

Joined: Wed Feb 13, 2013 4:42 am
Posts: 94
Location: Ft. Stewart, GA
Quote:
Quote:
Quote:
If you want to push wider you should be able to get away with 225/50s on a 15x7 but i wouldn't go lower than +32 offset. My future set-up is going to be 205/50s on 15x6.5 +38 I've calculated it out to be fairly flush.
Alright thanks, i thinking of 225's originally but i didn't know how well they would fit & if i would get rubbing problems. I was originally going to run my rx7 wheels but they are 16x7 & +50 offset
The RX7 wheels are actually 16x8"

225/50 might still rub, unless you do some fender-rolling.

Thanks, my mistake

& I'm not against rolling my fenders. I should prob do it before i dip my car


Top
   
PostPosted: Wed Mar 27, 2013 1:08 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2142
Location: Tucson Az
arent stock 1g rims 16" ? mine are



Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
PostPosted: Wed Mar 27, 2013 2:28 pm 
Offline
2nd Banana
User avatar

Joined: Wed Dec 28, 2005 1:16 pm
Posts: 9369
Location: San Diego, CA.
Quote:
arent stock 1g rims 16" ? mine are



Steve
Stock 1g rims are 16x6" I believe, i think +46 offset

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus


Top
   
PostPosted: Wed Mar 27, 2013 3:17 pm 
Offline
CSM Junkie
User avatar

Joined: Thu Jul 06, 2006 4:22 am
Posts: 604
Location: Whale's Vagina, Commiefornia
+43 on a 15x7.5 rim with 225/50 BFGs:

Image

I had to remove material from the lower rear spring perches and I rub on the trans with tight right turns.

_________________
'18 X5
'19 M5 Comp
'07 997 Turbo, 1144WHP/1001WTQ
'17 Fiesta ST


Top
   
PostPosted: Thu Mar 28, 2013 3:09 am 
Offline
Member
User avatar

Joined: Wed Feb 13, 2013 4:42 am
Posts: 94
Location: Ft. Stewart, GA
Thanks for the picture, that car looks nice ^ Good to see what they will potentially look like. Assuming its AWD by the 225's all the way around, what did you choose as far as suspension & brakes go

Edit* going to order a custom set of these today http://www.diamondracingwheels.com/inde ... eet-wheels

15x7 or 7.5 & with +40 offset.


Top
   
PostPosted: Thu Mar 28, 2013 9:45 am 
Offline
CSM Junkie
User avatar

Joined: Thu Jul 06, 2006 4:22 am
Posts: 604
Location: Whale's Vagina, Commiefornia
Yes, AWD. Stock brakes, stock front suspension (GR2s), and stock rear 1G AWD (GR2s).
Quote:
Thanks for the picture, that car looks nice ^ Good to see what they will potentially look like. Assuming its AWD by the 225's all the way around, what did you choose as far as suspension & brakes go

Edit* going to order a custom set of these today http://www.diamondracingwheels.com/inde ... eet-wheels

15x7 or 7.5 & with +40 offset.

_________________
'18 X5
'19 M5 Comp
'07 997 Turbo, 1144WHP/1001WTQ
'17 Fiesta ST


Top
   
PostPosted: Thu Mar 28, 2013 10:27 am 
Offline
Member
User avatar

Joined: Wed Feb 13, 2013 4:42 am
Posts: 94
Location: Ft. Stewart, GA
Quote:
Yes, AWD. Stock brakes, stock front suspension (GR2s), and stock rear 1G AWD (GR2s).
Quote:
Thanks for the picture, that car looks nice ^ Good to see what they will potentially look like. Assuming its AWD by the 225's all the way around, what did you choose as far as suspension & brakes go

Edit* going to order a custom set of these today http://www.diamondracingwheels.com/inde ... eet-wheels

15x7 or 7.5 & with +40 offset.

Thanks, i really do appreciate the help


Top
   
PostPosted: Fri Mar 29, 2013 11:26 am 
Offline
Member
User avatar

Joined: Wed Feb 13, 2013 4:42 am
Posts: 94
Location: Ft. Stewart, GA
Dan i sent you a PM


Top
   
PostPosted: Mon Jul 29, 2013 10:37 pm 
Offline
Member
User avatar

Joined: Wed Feb 13, 2013 4:42 am
Posts: 94
Location: Ft. Stewart, GA
Quote:
+43 on a 15x7.5 rim with 225/50 BFGs:



I had to remove material from the lower rear spring perches and I rub on the trans with tight right turns.

Got my rims & tires ordered today. Thanks again for the help, can't wait to test fit them


Top
   
PostPosted: Mon Jul 29, 2013 11:18 pm 
Offline
CSM Junkie
User avatar

Joined: Thu Jul 06, 2006 4:22 am
Posts: 604
Location: Whale's Vagina, Commiefornia
Post some pics!

_________________
'18 X5
'19 M5 Comp
'07 997 Turbo, 1144WHP/1001WTQ
'17 Fiesta ST


Top
   
PostPosted: Mon Jul 29, 2013 11:30 pm 
Offline
Member
User avatar

Joined: Wed Feb 13, 2013 4:42 am
Posts: 94
Location: Ft. Stewart, GA
Quote:
Post some pics!

I will, I still gotta install my top mount, turbo, wheels, setup the gauges, fuel pump, etc etc. This car is pushing the limits of a "street" car


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 22 posts ]  Go to page 1 2 Next

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited