What the F! I am not versed in computer stuff. I thought I was doing well when I figured out how to post pics. So now I delete some of the gallery for space limits, and find that the pics on the web site are GONE, too! So, okay, I guess they are not for long.
Anway, up to date: I got the toe hooks welded with a bracket. I followed the plan I had posted earlier. (cut out a bracket reinforcement, making the 2"x 1/4" U brket w/ through bolt to hold the bar, and welding Ubrket to reinforcement, and reinforcement to toe hook.) Here are pics of the items:
I then made the cross bar (<39" to allow for the reinforcement plate and a little room for the bar ends after I get them powder coated). I cut a smaller piece, and notched it for later placement on the main cross bar. This will allow me to negotiate placement of the front motor mount back and forth and fore and aft. Here is the pic.:
I then positioned the bracket placements over the control arm supports.
Here are the rear brackets after welding:
And here is one of the rear brackets in place and primed:
And here are a bunch of the pieces for the front and rear motor mounts:
That's it for now. I am troubled as to how the motor is to be positioned. For example, I have already made a placement for the for and aft bars, but I never had a number for the height or cross position. I am going to measure as to where the support bars are and ask about it. I also have some issues as to the engine bracket bolt on. I will have to delete some of the gallery pics (and,by extension, the pics on the website as well). Oh well. Later, Bill