4g61t.org

Specializing in the 3g CSM
It is currently Mon Mar 18, 2024 10:18 pm

All times are UTC-05:00




Post new topic  Reply to topic  [ 108 posts ]  Go to page Previous 14 5 6 7 8 Next
Author Message
 Post subject: Re: Bolt up cross member
PostPosted: Tue Sep 28, 2010 6:08 pm 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Wed Nov 14, 2001 7:00 pm
Posts: 236
Location: Perris California
Not sure

_________________
Griffin FMIC,HKS 272s,1000cc RC injectors,T4 60-1,Rallyart O2 , ACT2600street disc,Z06/MAFT blowthru,3in.turbo back,Walbro 255lph, Crane Cams DI2 ignition. Now A COLT AWD
LilKnockMeter,digital knock meter gauge www.insaneimportperformance.com


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Tue Sep 28, 2010 6:37 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Quote:
hmmm quick question, would that bolt in to my elantra?


No, the elantra cross member is about 2" longer than the csm ones.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Fri Oct 01, 2010 10:34 pm 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
i see. :(

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Thu Jan 27, 2011 12:23 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Jan 05, 2004 12:30 pm
Posts: 302
Location: Tucson AZ
Yea, I tried an elantra xmember for my fwd 4G63t swap and it was too long. I ended up using my stock one

_________________
87 Starion, PROJECT. With the CATAPLT COLT engine, Thanks Craig, (GSX)
92 Eclipse GSX (Dead)
89 Colt GT (AWD Swap) H1C
88 Cummins Suburban
69 Cutlass convertible
78 Arrow G54B Swap, Celeste makeover. (MOD 2016 Veteran)


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Fri Jan 28, 2011 11:27 pm 
Offline
CSM Junkie
User avatar

Joined: Wed Feb 28, 2007 10:20 pm
Posts: 635
Location: New Bedford, Mass.
Quote:
Yea, I tried an elantra xmember for my fwd 4G63t swap and it was too long. I ended up using my stock one
I used the elantra cross member and drilled 2 new holes :twisted:


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Wed Feb 23, 2011 1:07 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Jan 05, 2004 12:30 pm
Posts: 302
Location: Tucson AZ
Damnit tom, You didnt state that on your Cardomain page! I saw you used one but didnt say you modified it! haha, No worries, My car is running fine.

_________________
87 Starion, PROJECT. With the CATAPLT COLT engine, Thanks Craig, (GSX)
92 Eclipse GSX (Dead)
89 Colt GT (AWD Swap) H1C
88 Cummins Suburban
69 Cutlass convertible
78 Arrow G54B Swap, Celeste makeover. (MOD 2016 Veteran)


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Wed Feb 23, 2011 1:35 am 
Offline
CSM Junkie
User avatar

Joined: Wed Feb 28, 2007 10:20 pm
Posts: 635
Location: New Bedford, Mass.
Quote:
Damnit tom, You didnt state that on your Cardomain page! I saw you used one but didnt say you modified it! haha, No worries, My car is running fine.
Sorry buddy, didn't mean to screw you up like that,lol. :cry: But yeah you taught me something as well about the axle problem so we are even then :wink:


Top
   
 Post subject: Re:
PostPosted: Thu Apr 14, 2011 1:28 pm 
Offline
Member

Joined: Fri Mar 23, 2007 2:05 pm
Posts: 55
Location: Manchester, CT
WAOOOO!!! Bolt up cross member....
I got one of this laying down in my garage with mounts. I bought it from NZ.
Paid bigggg! $$$ to get delivered to Connecticut.
Quote:
Quote:
When looking under the car if you look on the pass sideof the floor there are two bolt hole that have nothing in them.Looks like the same spacing as the bolt holes for the fwd cross member.This is where the back of the crossmember bolts up to.The front bolts up like stock
So, you have made a crossmember to substitute for this factory piece?

Image


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Fri Jun 03, 2011 9:45 am 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Wed Nov 14, 2001 7:00 pm
Posts: 236
Location: Perris California
Yeap bolt up. No complaints whatsoever.Tested to 600 hp ,10seconds,1.5 60ft on slicks

_________________
Griffin FMIC,HKS 272s,1000cc RC injectors,T4 60-1,Rallyart O2 , ACT2600street disc,Z06/MAFT blowthru,3in.turbo back,Walbro 255lph, Crane Cams DI2 ignition. Now A COLT AWD
LilKnockMeter,digital knock meter gauge www.insaneimportperformance.com


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Fri Jun 10, 2011 8:33 pm 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
i pulled a x member out of a 92 plymouth vista wagon awd auto. there is no rear mount on the block its on the rear of the trans. ill grap a pic later.

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Fri Jun 17, 2011 9:14 am 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Fri Apr 04, 2008 8:30 pm
Posts: 376
Location: Chelmsford, MA
Are you sure this was a '92 and not a '93 made in late '92?

A true '92 vans would have been made between late summer of '91 through early summer of '92. They would also have a 6 bolt motor.


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Tue Jun 21, 2011 12:08 pm 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Wed Nov 14, 2001 7:00 pm
Posts: 236
Location: Perris California
Quote:
i pulled a x member out of a 92 plymouth vista wagon awd auto. there is no rear mount on the block its on the rear of the trans. ill grap a pic later.
Ive seen this one. If you get the bracket off the trans, it might bolt up too. My trans from an importer had this bracket but I want something available here all the time. I'm sure auto and 5speed brackets are different.I'll see if I can find the one I had.Its been years.

_________________
Griffin FMIC,HKS 272s,1000cc RC injectors,T4 60-1,Rallyart O2 , ACT2600street disc,Z06/MAFT blowthru,3in.turbo back,Walbro 255lph, Crane Cams DI2 ignition. Now A COLT AWD
LilKnockMeter,digital knock meter gauge www.insaneimportperformance.com


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Sat Jun 25, 2011 6:03 am 
Offline
CSM Junkie
User avatar

Joined: Thu Jun 10, 2010 10:57 pm
Posts: 550
Location: spokane, wa, usa
i have xmember with both front and rear mounts

_________________
93 Hyundai Elantra GLS-4g63t,f4a33,HolseHx35,pte 1000cc,evo ecu,aem 5 bar,plus lots of cool stuff


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Sat Jun 25, 2011 12:50 pm 
Offline
Member
User avatar

Joined: Tue May 30, 2006 9:42 pm
Posts: 181
Location: Utah
Quote:
i pulled a x member out of a 92 plymouth vista wagon awd auto. there is no rear mount on the block its on the rear of the trans. ill grap a pic later.
Look at my awd build thread. I used the awd vista crossmember with success. And I still have a jacking point like before!

_________________
89 Original Turbo Colt Gt AWD PTE 6262 Built 9:1, TRE stage 2. 10.93@129
05 Evolution VIII FP Green, garage queen.
97 Eclipse Gsx 80k miles, 6 Bolt, HX-35
08 Ford F-350 6.4 PSD 3 mods and 600hp :)


Top
   
 Post subject: Re: Bolt up cross member
PostPosted: Thu Nov 03, 2011 9:21 am 
Offline
Spends Too Much Time Under The Hood

Joined: Fri May 06, 2011 8:23 am
Posts: 210
Location: Cleveland, OH
Anyone know how to get ahold of this guy? He disappeared :(

_________________
1990 Colt AWD 8.8


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 108 posts ]  Go to page Previous 14 5 6 7 8 Next

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited