89 turbo hatch. I dont have the stock drivers side axle. It broke when i first got it. So i put in a 90fwd dsm axle.
And yet another set back
| 4g61t.org http://4g61t.org/forum/ |
|
| AWD guys. Front Axles? http://4g61t.org/forum/viewtopic.php?f=57&t=20108 |
Page 1 of 3 |
| Author: | Red Sleeper [ Tue Jan 23, 2007 2:33 pm ] |
| Post subject: | AWD guys. Front Axles? |
I"m about 80% of the way done with my car. I'm now putting the front axles in. I used the factory turbo colt passenger side. and i went to use the AWD dsm drivers side. But it seems to be tooo long. What axles did you guys use. |
|
| Author: | 89coltgt [ Tue Jan 23, 2007 3:01 pm ] |
| Post subject: | |
In Jason's awd dvd, he says you can use the 4g61t(c53) axles. |
|
| Author: | LILEVO [ Tue Jan 23, 2007 3:04 pm ] |
| Post subject: | |
Ya mooch. There's an easy answer to most any swap related questions. What kind of car are you swapping into? Ok, then that's what you use. Mirage turbo axles were "designed" for the turbo style transmission. I am running those axles and they work perfectly. I can't speak for 1.5L manual or auto or 1.6L NT axles. |
|
| Author: | 89coltgt [ Tue Jan 23, 2007 3:08 pm ] |
| Post subject: | |
Quote: In Jason's awd dvd, he says you can use the 4g61t(c53) axles.
Assuming you are swapping into a 3g c/s/m.
|
|
| Author: | Red Sleeper [ Tue Jan 23, 2007 3:49 pm ] |
| Post subject: | |
89 turbo hatch. I dont have the stock drivers side axle. It broke when i first got it. So i put in a 90fwd dsm axle. And yet another set back
|
|
| Author: | LILEVO [ Tue Jan 23, 2007 3:51 pm ] |
| Post subject: | |
You can use a GVR4 or AWD DSM intermediate shaft that bolts to the block, but you should (have to?) use a Mirage turbo axle. This is the only picture I could find. This is the passenger side axle though. 1.6L T on the left, 1.5L manual on the right. 1.6L T is the axle that will "snap" into a turbo tranny. That 1.5L axle will not lock into the transmission 
|
|
| Author: | Red Sleeper [ Tue Jan 23, 2007 4:23 pm ] |
| Post subject: | |
Well does anyone happen to have that part of the axle. |
|
| Author: | LILEVO [ Tue Jan 23, 2007 4:25 pm ] |
| Post subject: | |
Try www.car-part.com |
|
| Author: | Red Sleeper [ Tue Jan 23, 2007 4:49 pm ] |
| Post subject: | |
Quote: Try www.car-part.com
No go. 
|
|
| Author: | LILEVO [ Tue Jan 23, 2007 4:51 pm ] |
| Post subject: | |
Why not? I saw hundreds of them. 91 Eclipse, AWD left axle. "stub shaft" "includes int shaft" "mid shaft" |
|
| Author: | Red Sleeper [ Tue Jan 23, 2007 4:53 pm ] |
| Post subject: | |
Wait.. maybe your confused.. I have a drivers side 2piece axle from a AWD talon. I put it on, and it wont fit. its a bit too long, and i cant get the hub to bolt to the strut. |
|
| Author: | LILEVO [ Tue Jan 23, 2007 4:55 pm ] |
| Post subject: | |
Ok, so keep the part that bolts to the block, and find a Mirage Turbo "axle". I got both my pass and driver axles from Carquest. $74 each, brand new, lifetime warranty |
|
| Author: | Red Sleeper [ Tue Jan 23, 2007 5:13 pm ] |
| Post subject: | |
Well i guess thats where i'll be going. Wouldnt happen to have a part number? I've been to a few Auto parts stores and they always give me the wrong one. 
|
|
| Author: | LILEVO [ Tue Jan 23, 2007 6:09 pm ] |
| Post subject: | |
Dside carquest p/n RDS 322 (It might be RDS 3229, I can't read the number anymore). It comes up if they search for 1989 Mirage Turbo Pside carquest p/n RDS 3212 |
|
| Author: | MR HYDE [ Mon Aug 27, 2007 5:48 pm ] |
| Post subject: | |
Some please archive this thread!! |
|
| Page 1 of 3 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|