4g61t.org
http://4g61t.org/forum/

Timeslips
http://4g61t.org/forum/viewtopic.php?f=44&t=12918
Page 2 of 10

Author:  Pixt3r [ Wed Aug 10, 2005 5:18 pm ]
Post subject: 

C53A

4g63T 6bolts
full rebuild (approx. 20 000km)

2G pistons
balance shafts eliminated
14B @ 15psi
walbro 255lph
3 in exhaust press bent
front mount IC (22x8x3.5)
ported head
kyb gr2 4 corners
stock coils :o . will install the coils-overs soon.

street tires
full interior

time : 14.034 @ 102.35mph
60' : 2.152
1/8 : 9.103 @ 83.69 mph

made 203whp and 242.8 lb/torque @ 17psi on mustang dyno. Is it good for a nearly stock engine ?

Author:  unior [ Wed Aug 10, 2005 8:50 pm ]
Post subject: 

Quote:
C53A

4g63T 6bolts
full rebuild (approx. 20 000km)

2G pistons
balance shafts eliminated
14B @ 15psi
walbro 255lph
3 in exhaust press bent
front mount IC (22x8x3.5)
ported head
kyb gr2 4 corners
stock coils :o . will install the coils-overs soon.

street tires
full interior

time : 14.034 @ 102.35mph
60' : 2.152
1/8 : 9.103 @ 83.69 mph

made 203whp and 242.8 lb/torque @ 17psi on mustang dyno. Is it good for a nearly stock engine ?
sounds about right - maybe a hair low - mustang dynos read lower though

my buddy made 250awhp with VPC, 450s, stock smic, hard IC pipes, 15psi - that was on a dynojet

Author:  forgues [ Thu Aug 11, 2005 11:59 pm ]
Post subject: 

Colt gl 1993 1.5l manual
1/4 time: 18.84
I have only a p-flow

Author:  GSRWRC [ Mon Sep 12, 2005 1:54 am ]
Post subject: 

Quote:
Car Model/Year: 1992 Lancer GSR (CD5A 4WD Turbo)

Reaction Time: 0.392

60ft: 1.775 (On 17"s no less )

1/8th 8.256 @ (81.99mph)

ET: 12.965 @ (102.59mph)

Mods:
2.5" Exhaust (Flexi joint back)
K&N pod
Evo ECU, AFM and Injectors
TD05 Small 16g
38mm Tial external wastegate
Walbro 255lph pump
Hybrid EBC 16psi
Evo intercooler and piping
Ceramic Clutch
Oil Catch Can
Evo 2 pot Front brakes
17" Advanti Racing wheels
Evo 2 Front bumper and Guards


EDIT: Updated, now into the 12s :D

Update again:

R/T: .145
60': 1.865
1/8: 8.109 @ 86.6mph
1/4: 12.691 @ 105.5mph


Have since fixed my absolutely stuffed suspension since this so hoping to drop my 60' times down to about 1.6s (Have done 1.77 60's before on the old stuff)

Aiming for 12.3 on the standard internals :D

Author:  monsterbishi [ Sun Sep 25, 2005 7:07 pm ]
Post subject: 

_RT_60'___660'__MPH__ET
.411 1.920 8.356 109.22 12.931 --- Bad 60' - Freshy laid VHT
.414 1.782 8.177 109.49 12.751 ---
.423 1.997 8.476 108.17 13.088 --- Bad 60' - VHT worn off
.457 1.728 8.154 109.75 12.711 ---
.739 1.771 8.018 111.11 12.504 --- :-o
.397 1.864 8.607 110.29 13.152 --- Missed 2nd, Redlight
.376 1.782 8.277 109.76 12.827 --- Redlight
.663 1.848 8.177 104.65 12.937 --- Missed 4th

Author:  dlanda [ Sun Oct 09, 2005 1:31 pm ]
Post subject: 

89 mirage turbo
4g63 swap
2g pistons
no balance shafts
extrude honed intake manifold
small 16g@ 15psi
walbro 255
tiny fmic
3" exhaust with 02 dump
stock injectors
act clutch

60' 1.91
330 5.51
1/8 8.37
mph 85.60
1000 10.86
1/4 12.93
mph 108.43

This was on 22x8x15 slicks on stock suspension

Friends 91 colt
4g63 swap
stock internals
no balance shafts
evo3 16g @ 19 psi
2g exh manifold
550cc injectors
safc
fmic
walbro 255
3'' exhaust
22x9.5x13 slicks
stock 4 speed tranny with act n/t clutch

ran a 12.53 at 115 with a 1.90 60ft

Author:  monsterbishi [ Sun Oct 23, 2005 2:18 am ]
Post subject: 

_RT_60'___660'__MPH__ET
.516 1.877 8.368 109.76 12.939 --- VHT Not Fully Cured, Missed 2nd
.292 1.738 8.076 111.76 12.567 ---
.813 1.763 8.004 112.49 12.449 --- Turned Boost up to 19psi
.357 1.721 7.939 112.21 12.376 --- :-o

Author:  Paul [ Mon Oct 24, 2005 10:09 pm ]
Post subject: 

60ft- 1.865
1/8- 8.3 at 84.7mph
1/4- 12.99 at 105.6mph

91awd talon
s16g
mbc
3in downpipe
ACT 2600

Author:  adamrx7 [ Mon Oct 24, 2005 10:31 pm ]
Post subject: 

13.2 @ 104
http://img.photobucket.com/albums/v289/ ... 0_0818.jpg
13.4@109
http://img.photobucket.com/albums/v289/ ... _0818a.jpg
4g63t
ported Evo 16g
450's, stock DSM IC
Snow tires

Author:  boostfreak [ Fri May 26, 2006 5:34 pm ]
Post subject: 

The New hotness

1.826 60ft
4.889 330'
7.125 @112.52mph 1/8

10.542@148.22mph

Author:  turbo=good [ Sun May 28, 2006 10:44 am ]
Post subject: 

91 summit
4g63
3" intake
3" exhaust with 3" cat
2g mas
FMIC
660s
SAFC
cyclone intake
stock clutch

205-50-15 hankook tires @ 15psi
boost 20psi
1 gallon of VP 110 mixed with about 4 gallons of 93oct

1/8th = 8.68@91.1
1/4th = 12.94@116.4

Author:  Vanimaniac [ Thu Jul 20, 2006 10:41 am ]
Post subject: 

Bone stock 1988 Mirage Turbo. Full interior. Full tank. Street tires.
Track at 5800 ft. above sea level. About 90 degrees at the track.

60' - 2.445
330 - 7.194
1/8 - 11.238
MPH - 60.72
1000 - 14.759
1/4 - 17.787
MPH - 74.54

Van

Author:  evil93evo [ Sun Aug 06, 2006 8:43 pm ]
Post subject: 

1993 Dodge Colt 4dr Drag Car

2.0 liter
eagle rods
wiseco pistons
crower 64414 cams
crower springs and retainers
1mm oversized valves
sheetmetal intake
8-1600cc injectors, soon to be 10
non intercooled
Methanol fuel
custom 321 header
2 44 tail wastgates
GT42 turbo (74mm)
100 shot direct port NX/NOS hybrid, spool only currently
AEM Race box ECU and CDI box


Auto tranny (FWD)
PI billet converter

In testing on my first full pass at low boost (27-30psi), nos to spool to 5000 rpm and 14psi...

9.444 at 144.99mph
6.066 at 116 mph 1/8th
1.455 60ft

a couple weeks prior I was at BOTI seattle, and ran 9.9's at 148+ just rolling out of the hole and no nitrous. We were running up 42 psi during eliminations but my horrible reaction times were too much, and the 1.7 sec 60 fts dont help either.

I cant wait to try the nitrous and high boost together

Author:  boostfreak [ Sun Aug 06, 2006 9:54 pm ]
Post subject: 

Nice. Makes my pile look like a honda. :(

Will you be bringing that to the shootout by chance?

Author:  Red Sleeper [ Sun Aug 06, 2006 10:16 pm ]
Post subject: 

89 colt gt.

Stock jdm 1.6
2.0 intake mani.
small fmic.
3in exhasut.
gm maft
3in intake.
br AFPR
walbro 255
alum. flywheel and act 2600
evo 3 16g and o2 @ 15psi

14.3 @ 105 feather 2nd as it was bouncing off the rev. limiter. I have to find the slip to get the rest of the details.

Page 2 of 10 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/