4g61t.org
http://4g61t.org/forum/

Our POS mirage dyno
http://4g61t.org/forum/viewtopic.php?f=42&t=40360
Page 1 of 1

Author:  biglady112 [ Tue Sep 22, 2015 11:50 pm ]
Post subject:  Our POS mirage dyno

https://youtu.be/aHcUAYITo4g

666hp 580tq

Author:  pma1123 [ Wed Sep 23, 2015 9:00 am ]
Post subject:  Re: Our POS mirage dyno

That thing is a BEAST!!! Nice work!!!

Author:  Flying Eagle [ Wed Sep 23, 2015 11:00 am ]
Post subject:  Re: Our POS mirage dyno

Dude .... Yes.

Author:  Kevo [ Wed Sep 23, 2015 8:39 pm ]
Post subject:  Re: Our POS mirage dyno

Nice numbers! Any 1/4 passes on that setup yet?

Author:  biglady112 [ Thu Sep 24, 2015 6:19 am ]
Post subject:  Re: Our POS mirage dyno

The car likely won't pass tech to even have a shot at making a pass. We are trying to line a race up against a car with a decent time slip

Author:  wrx110487 [ Thu Sep 24, 2015 10:13 am ]
Post subject:  Re: Our POS mirage dyno

Nice love the setup. What clutch setup?

Author:  biglady112 [ Thu Sep 24, 2015 11:51 am ]
Post subject:  Re: Our POS mirage dyno

Used act 2600 with a used street disc.

Author:  wrx110487 [ Thu Sep 24, 2015 2:15 pm ]
Post subject:  Re: Our POS mirage dyno

Really? No issues with slipping or shifting anywhere 8k+?

Author:  biglady112 [ Thu Sep 24, 2015 5:46 pm ]
Post subject:  Re: Our POS mirage dyno

Took it out yesterday and did a 1-4 NLTS at 8750. No issues so far.

Author:  biglady112 [ Mon Sep 28, 2015 3:14 pm ]
Post subject:  Re: Our POS mirage dyno

Mexico opened the border last night to let us come down for a quick visit. While there we happened to find some cars that wanted to play.

Sorry for the worst video in the history of the planet.

https://www.youtube.com/watch?v=cv35N40 ... e=youtu.be

Left lane- 650hp AWD Mirage
Center lane- 740hp C6 Corvette
Right Lane- BMW 1000rr with a few things done

C6 Z51 chassis. 740hp. We went from a second gear roll. The BMW 1000rr beat Me by about 2-2.5 cars. They both got out on my because of lag(5500rpm in second gear was still not high enough). Once the mirage started making power it held the bike at 2+ lengths through the top of fourth. Very fair race from all parties with no excuses. All parties did well and brought all they had.

Author:  Moulin13 [ Mon Sep 28, 2015 6:49 pm ]
Post subject:  Re: Our POS mirage dyno

Let me join next time, just to see where I'm at with that hatch

Author:  biglady112 [ Tue Sep 29, 2015 11:54 am ]
Post subject:  Re: Our POS mirage dyno

https://m.youtube.com/channel/UCuoisFvSGrNmRNabPeFLd6g

First race with the bike and Yvette where I blew a coupler at the top of fourth and the bike started in second gear.

Author:  biglady112 [ Thu Oct 01, 2015 10:54 am ]
Post subject:  Re: Our POS mirage dyno

https://m.youtube.com/watch?v=ag0v7zijr ... e=youtu.be

10.6@141 first pass ever in the car. 10.4@142 on the second pass getting more comfortable. Then the clutch started acting up and would not allow me to shift into second three passes in a row. Something happened as it would not even go into first when I went to public it on the trailer. I had to drive on the trailer in second gear. When I pressed the clutch it was making noises after the last attempt. It was blowing the tires off to 1.6 60's. Even at 12psi in the front and 10psi in the rear. I think another pass or two it could hit a 10.3 or a 10.2 with those tires. That is about all they can do. Just some cheap H rated all season tires. No complaints. It did well and drove back on the trailer with minimal issues.

Track altitude is 5800ft, density altitude was 7900ft last night.

Author:  Kevo [ Fri Oct 02, 2015 10:44 am ]
Post subject:  Re: Our POS mirage dyno

Well done. That trap is sick!

Author:  turbotom20g [ Tue Dec 01, 2015 3:09 pm ]
Post subject:  Re: Our POS mirage dyno

Nice, sick!!!

Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/