4g61t.org
http://4g61t.org/forum/

WRX110487 Eagle Summit Build (New Vids and Update 8/10/18)
http://4g61t.org/forum/viewtopic.php?f=42&t=38914
Page 4 of 5

Author:  boostfreak [ Fri Aug 05, 2016 7:33 pm ]
Post subject:  Re: Much Needed and Long Overdue Summit Build Update (8/5/16

Dude, its beyond perfect.

You have to be so stoked about how well this car has turned out.

Author:  spinsallday [ Mon Aug 29, 2016 8:54 am ]
Post subject:  Re: Much Needed and Long Overdue Summit Build Update (8/5/16

This car is absolutely badass!

Author:  Mechacode [ Mon Sep 05, 2016 10:34 am ]
Post subject:  Re: Much Needed and Long Overdue Summit Build Update (8/5/16

Awesomeness.

Author:  Turbogt [ Mon Sep 05, 2016 2:58 pm ]
Post subject:  Re: Much Needed and Long Overdue Summit Build Update (8/5/16

Worlds nicest awd swap

Author:  TurboSummit [ Sat Sep 10, 2016 4:38 pm ]
Post subject:  Re: Much Needed and Long Overdue Summit Build Update (8/5/16

Awesome that this is my old Summit. I saved this thing from a Junkyard in 2002!!

Author:  wrx110487 [ Sat Sep 10, 2016 8:10 pm ]
Post subject:  Re: Much Needed and Long Overdue Summit Build Update (8/5/16

Haha yea it's definitely come a long way. It gets abused pretty much everytime it leaves the garage, but I guess that's better than being crushed and melted. A couple quick updates. I went to the track and first pass went 11.0 at 136 with a 1.68 60'. Definitely rusty launching an AWD car. Plus I had the launch control at 5250 to start which I quickly found out was way to low. Next pass upped the launch control to 5750 and cut a 1.52 60' and got locked out of second on the limiter. F*** this, next pass upped to launch control to 6500 and cut a 1.44 60', clean 1st to 2nd, and 2nd to 3rd, and intercooler pipe pops off. 90 degrees out and a ton of cars so just decided to swap the slicks and drive home.

Made the 50 miles trek back home no issues. The clutch was feeling kinda odd all day and after getting home I guess I pushed my luck a little too far and decided to give my Dad a ride for the first time since converting to AWD. We went to grab dinner less than a mile from my house and on the way did a quick 2nd through 4th pull. Immediately after the pull I go to push the clutch in and there's no pedal. Luckily there was a green light and I coasted into the restaraunt parking lot. Slave took a shit on me. I've been having lockout issues for a while now and I was kind of hoping this was the culprit. Anyways long day... called AAA, got some food while we waited and called it a day.

Pic at the track with the slicks on...
Image

Hit up amazon and got an OEM slave and also picked up a new Yi 4k Action Cam (amazingly nice half-price GoPro) for ensuing shenanigans. First test of both the camera and slave show promising results....

https://www.youtube.com/watch?v=wqMz4388Mq0

Haven't been back to the track yet, but been putting in some street time...

Put some buses on a intake, exhaust, tune Hellcat (obviously pre-new camera and pretty much the reason I bought the new camera hah)...

https://www.youtube.com/watch?v=9JnN2EMImXo

After a local meet I was cruising home looking for a run and these two bikes merged on right in front of me. Don't know them at all and the whole interaction from me rolling up on them to getting off the exit is the entire video. As far as I could tell they both had exhausts at the least and one was stretched. I'm not a big bike guy so if you guys can tell what they are please share. When I first revved at them they both looked at me and pretty much laughed. Gave them a little 2nd gear to get some interest and they bit. They couldn't catch me the first run and they kept coming back for more from there. Good times...

https://www.youtube.com/watch?v=jsaGteJx5yA

Last night was the best test so far for the car. Huge meet that brought out some seriously nice cars. Probably 40+ cars and a 150 mile round trip to the spot and back. I was the only car under 25-30k and most were 40k+. No one would run me until I beat the shit out of an R8. After that it was on. Probably did 20+ runs through the night and the car didn't skip a beat. More proud of that than anything honestly. I didn't get all of the runs on tape because honestly it was nonstop, but here's the runs I did get...

https://www.youtube.com/watch?v=DdMvhV8ceoI

-supercharged M3
-V10 Audi R8
-C7 Z06
-Switzer P800 GTR
-Full bolt on E85 GTR
-Modded Camaro
-2015 Modded Viper

The only close race I had the whole night was the C7 Z06 and that was my own fault. Next mod is putting a horn back on the car. I can't hear shit in the car and basically just have to give the hit up and wait for them to go and just react from there. That's not going to cut it with some of the faster cars around here. Hopefully get back to the track here soon with updates.

Author:  Keane [ Sun Sep 11, 2016 10:04 am ]
Post subject:  Re: WRX110487 Eagle Summit Build (New Vids and Update 9/9/16

"Gawd damn... man that thing runs!!" Lol, love the guy in the r8

Author:  spinsallday [ Mon Sep 12, 2016 4:27 pm ]
Post subject:  Re: WRX110487 Eagle Summit Build (New Vids and Update 9/9/16

Wow. That thing looks like it runs decent! Do you use any nitrous to spool up the turbocharger? Who did the AWD swap?

Author:  boostfreak [ Mon Sep 12, 2016 4:57 pm ]
Post subject:  Re: WRX110487 Eagle Summit Build (New Vids and Update 9/9/16

Lol, "wipers up!" My old hatch used to do that past 150mph too :)


You sir are a Savage!! Most action I've seen in one video in a while. Cleveland Colt Crew 4 life yo.


Next time you in town we definitely need to try it out ;)

Author:  wrx110487 [ Wed Sep 14, 2016 5:05 pm ]
Post subject:  Re: WRX110487 Eagle Summit Build (New Vids and Update 9/9/16

I'm always down JP. Already took off the wipers, the car pretty much never sees the rain anyways. I ended up picking up this Stebel horn on Amazon. One of my buddies has it on his GTR and it's pretty damn loud while still having a good sound to it. Here's the link if anyone else needs one. Can't beat $24

https://www.amazon.com/gp/product/B00CM ... VG3F7QZ0W2

Author:  wrx110487 [ Wed Sep 14, 2016 5:07 pm ]
Post subject:  Re: WRX110487 Eagle Summit Build (New Vids and Update 9/9/16

One of my buddies sent me this video from that same night. Supra has a 366 and not sure what else...

https://www.youtube.com/watch?v=n6ygGz8t2Rs

Author:  boostfreak [ Thu Sep 15, 2016 11:21 am ]
Post subject:  Re: WRX110487 Eagle Summit Build (New Vids and Update 9/9/16

" Dont know what the fruit and banana this is but it just Gap'd the fruit and banana out of me"

LOL

Author:  Flying Eagle [ Thu Sep 15, 2016 11:43 am ]
Post subject:  Re: WRX110487 Eagle Summit Build (New Vids and Update 9/9/16

We have all of three word filters currently engaged on the site. I think you get the idea. wink wink.

Author:  boostfreak [ Thu Sep 15, 2016 11:54 am ]
Post subject:  Re: WRX110487 Eagle Summit Build (New Vids and Update 9/9/16

Yup!

LOL

Author:  canada4g63 [ Thu Dec 08, 2016 12:51 pm ]
Post subject:  Re: WRX110487 Eagle Summit Build (New Vids and Update 9/9/16

I really need to finish my colt. How much do you weight full? I want to gut mine because I don't need any off the interior pieces. Car looks dope.

Page 4 of 5 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/