4g61t.org

Finally figured out how to upload an image of my ride. I got my mirage up in running a couple of weeks ago and its still running after about 4 years of collecting dust and weeds growing in the engine bay. No mods to the 4g61t motor. The only thing I did so far was scrape off the purple window tint that had a lot of air pockets.

that car is nice do you plan to put a 4g63t in it or awd it ,color match it white it looks good on those cars

so sexy

Find a base model CSM to hack up, if you desire to convert to AWD.

Those turbo models are too sexy to cut up.

Anyways....nice ride! Why was it sitting for so long?

MOAR!!!!!!!!!1

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus

Uh ohh....you've upset the camera god. I think that meant "take more pictures!"

A few years ago I was having electrical problems and no one could figure it out, even those so-called certified mechanics. Then, a couple of weeks ago I bought an ECU from member 4dr4g63 because I already sent to my ECU to ECMtoGO to have it checked out. I installed the ecu from 4dr4g63, messed around with the starter wires and some how after making the battery positive post spark, the car started and ran without sputtering at 3,000rpm, which was happening with my ECU when I shifted gears.
Now that the car is running like new, I would like to get the oil drip stopped, which seems like its coming from somewhere by the oil pan, replace the sway bar bushings, get new suspension, and rims.
I don't plan on making the mirage awd anytime soon. It would be nice. For now I plan on exterior mods and get the interior fixed. I'm sure everyone has problems with the stock seats coming apart at the seams and dash board falling apart.

I've never seen one here that didn't need a little stitching

Looking forward to replacing the sway bar bushings, too! Oh joy