4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 4:10 am

All times are UTC-05:00




Forum locked  This topic is locked, you cannot edit posts or make further replies.  [ 9 posts ] 
Author Message
PostPosted: Sat Jan 23, 2010 2:15 pm 
Offline
Restricted Newbie

Joined: Mon Jul 13, 2009 2:59 pm
Posts: 4
Location: Albuquerque, New Mexico
Everything for sale came out of a 1990 Laser w/90,000miles. It drove great, good boost, smooth transmission, etc. I drove it once before pulling the engine but have no knowledge of the history of the car.
Expert Engines (here in Albuquerque, NM.) took care of the block; plain’d, dipped, polished (crank too), bored (.30over) and got the pistons & rings ($305.00 for everything).
I have everything;
Motor (complete), Transmission (complete), Wiring Harness, ECU, Starter, A/C Compressor, Manifolds (intake and exhaust w/turbo), radiator, axels, motor mounts, etc. I will sell all of this for $1,500.00

I also have 4ea. 15” Eagle Alloy Wheels (tires are no good) $150.00

1992 Mirage (1.5L). Odometer says 245,000 miles. I have had it 2 years and replaced distributor, rear main seal (that cost me $900.00 to have done), battery, fuel pump, had the fuel tank relined, seats (from a junkyard) new tires and starter. These are what I can remember. I drive it 70miles a day (roundtrip) for work. The body is straight (I don’t think it’s ever been wrecked) but there is rust on the roof. The car won’t be available to take until the middle of Feb. $600.00.

Engine (W/everything) $1,500.00
Wheel $150.00
Car $600.00
Or $2,000.00 the whole kit and kabootle.
I want to wait a week or two before I start selling things individually (like radiator, turbo, etc.)
Shipping will be whatever it costs me. I can drive and meet you within reason or for .50 cents a mile.

See picture here http://s1000.photobucket.com/albums/af1 ... /?newest=1
Code:
http://s1000.photobucket.com/albums/af123/RayWhite8/?newest=1


Last edited by BombsquadRay on Sat Jan 23, 2010 3:12 pm, edited 1 time in total.

Top
   
PostPosted: Sat Jan 23, 2010 2:18 pm 
Offline
Owner/Admin
User avatar

Joined: Fri Aug 01, 2008 1:24 am
Posts: 1005
Location: Riverside, CA
http://www.4g61t.org/forum/viewtopic.php?f=4&t=30209 :wink: or ask a mod for a green light


Top
   
PostPosted: Sat Jan 23, 2010 3:11 pm 
Offline
Restricted Newbie

Joined: Mon Jul 13, 2009 2:59 pm
Posts: 4
Location: Albuquerque, New Mexico
Quote:
I see :o Thanks turboshawn. So how about it moderators, can I stay? I don't mind making it a pick up only sale. I could meet the Colorado guys 1/2 way.


Top
   
PostPosted: Sat Jan 23, 2010 5:50 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
I honestly have no problems with it, if you do offer to ship parts can you provide good feedback for yourself from other boards or ebay?

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Sat Jan 23, 2010 6:19 pm 
Offline
Restricted Newbie

Joined: Mon Jul 13, 2009 2:59 pm
Posts: 4
Location: Albuquerque, New Mexico
I haven’t really sold things on this or other forums. I have bought and sold a few things on e-bay (raynval4u username)…all good feedback.
I would mention that I’m in a Military Special Missions Unit (Army EOD WMD) where I have to keep a Top Secret Clearance (TSSSBI/CNWDI/SIGMA1-20/etc). They investigate everything and even bad dealings with things like this would affect that, so I wouldn’t do it.
I just got put on assignment for Ft. Polk, LA. (report this summer) so I need to put the brakes on this project and sell it off. I will use the money to fix my truck and get it ready for the move.


Top
   
PostPosted: Sat Jan 23, 2010 6:29 pm 
Offline
Owner/Admin
User avatar

Joined: Fri Aug 01, 2008 1:24 am
Posts: 1005
Location: Riverside, CA
Good luck with your sale! :twisted:


Top
   
PostPosted: Sat Jan 30, 2010 4:05 pm 
Offline
Restricted Newbie

Joined: Mon Jul 13, 2009 2:59 pm
Posts: 4
Location: Albuquerque, New Mexico
OK, I am now ready to sell things in smaller lots. If there's something you need/want, make me an offer and I will consider it and just charge whatever the shipping costs are.


Top
   
PostPosted: Wed Feb 10, 2010 11:59 am 
Offline
Restricted Newbie

Joined: Mon Jul 13, 2009 2:59 pm
Posts: 4
Location: Albuquerque, New Mexico
OK, last bump before I start to sell things on e-bay. I will sell the short block for $500.00 (it has over $300.00 in machine work and new pistons), the wheels for $100.00 and will take offers for anything else.


Top
   
PostPosted: Wed Feb 10, 2010 1:06 pm 
Offline
Some call me a god

Joined: Thu Nov 20, 2008 4:29 pm
Posts: 1157
Location: Wenonah new jersey
i wish you were closer. i would buy that mirage today.

_________________
_____________________
1993 single turbo supra
2000 Lexus sc300
2016 ram 1500


Top
   
Display posts from previous:  Sort by  
Forum locked  This topic is locked, you cannot edit posts or make further replies.  [ 9 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited