4g61t.org

I know its a long shot, but I was hoping someone out there had these laying around. I know I can get them at any hardware store but Im really picky about things like this and would prefer trying to get OEM hardware (which is discontinued by Mitsu) before going the auto-parts store method. There is 8 of the bolts total, which have lock washers, but I dont need those. I need the bolts from the rear disc setup only as the rear drum setup, which is what im swapping over from, uses shorter bolts but the lockwashers are the same. Heres a pic that I grabbed from the archives and modified to provide a better idea of exactly what im looking for.

Thanks,
-Mike

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped

The bolts that hold the tranny mount to the frame (the ones behind the rubber plugs behind the tire) on csm's are the same size, pitch and pretty close to the same length. I usually just snatch those from two different cars at the yard since it takes eight. Only difference is that the oem ones have a 12mm head and these use a 14mm. Just thought I'd throw that out there if nobody has the correct ones laying around.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

Those are some rare bolts. How much would you pay me for a set?

IDK, how much were you looking to get? I mean, I dont want to spend a rediculous amount, but i do need them so PM me what you were looking to get for them.


Thanks,
-Mike

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped

Bump, still looking for these. Im going to give it until the end of the week, if still no luck than i'll just go to Fastenal.

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped

what car is this from and will a galant vr4 bolts work LMK

I looked at mine today and only 7 of the bolts are the originals.

These would be from the back of a Turbo CSM, or any CSM with rear disc brakes. I dont think the DSM or Galants use a bracket that holds the rear brake caliper to the axle beam, I'm pretty sure they are mounted directly.

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped