4g61t.org
http://4g61t.org/forum/

DSM parts FS
http://4g61t.org/forum/viewtopic.php?f=4&t=27324
Page 1 of 2

Author:  Twenty5psi [ Thu Dec 18, 2008 8:54 pm ]
Post subject:  DSM parts FS

-17" black racing pro n1 rims with really decent yokohama avs es100's (have ~ 1200 miles on them). One of them has a nail in them, which could easily be removed and patched from the inside. Holds air well. One of the rims has a decent curb rash. Other than that, they are a really light rim set with really decent tires. -500
-Apexi 60mm boost gauge psi- 45
-starter- 30
-2g pistons w/ rods in good shape- 40
-oem 6 bolt flywheel, has small crack- 15
Autometer larger series blower gauge 0-60 psi sport comp- 30
Autometer larger series oil pressure gauge sport comp- 30
Used Ross Pistons 7.8-1 85mm -175
2g coil pack
1g coil pack mounted on a JNZ plate
2g used water pump
Apexi 60mm boost gauge in bar, no glass face to it but works great
2 falken ziex tires 215-45-17 (decent tread, one has nail in it that holds air but can easily be patched)
Dejon leak stop kit
97 Talon Front Bumper (small crack, easily repairable and very sought after bumper!)- 85
2 piston brakes from 2g- 60
18 inch black rims with polished lips. curb rash in a few spots and need new tires

Image
Image
Image
Image
Image
Image
Image

Author:  silverls [ Thu Dec 18, 2008 8:58 pm ]
Post subject:  Re: DSM parts FS

how much for the plate that the cp is on

Author:  Twenty5psi [ Thu Dec 18, 2008 10:15 pm ]
Post subject:  Re: DSM parts FS

Quote:
how much for the plate that the cp is on
I was selling it whole. You can just buy the whole thing and then sell the CP if you wanted. I just don't need anymore parts laying around.

Author:  silverls [ Fri Dec 19, 2008 4:29 pm ]
Post subject:  Re: DSM parts FS

is this 25 psi from lvdsm

Author:  Twenty5psi [ Fri Dec 19, 2008 5:38 pm ]
Post subject:  Re: DSM parts FS

Quote:
is this 25 psi from lvdsm
Yes it is.

Author:  silverls [ Fri Dec 19, 2008 8:17 pm ]
Post subject:  Re: DSM parts FS

well hell it is dsm guy .do u have a csm?

Author:  Twenty5psi [ Sat Dec 20, 2008 11:38 am ]
Post subject:  Re: DSM parts FS

Quote:
well hell it is dsm guy .do u have a csm?
Haha, I had a colt GT turbo a year and a half ago. I forgot all about this place until the other day.

Author:  Twenty5psi [ Sun Dec 21, 2008 5:06 pm ]
Post subject:  Re: DSM parts FS

Someone can use these parts! I have pics of everything guys!

Author:  ctwombly [ Sun Dec 21, 2008 5:40 pm ]
Post subject:  Re: DSM parts FS

PM sent on oil pressure gauge and Bullseye housing.

Author:  Legolas337 [ Mon Dec 22, 2008 3:26 pm ]
Post subject:  Re: DSM parts FS

Pm sent on the mani!

Author:  Twenty5psi [ Tue Dec 23, 2008 9:54 pm ]
Post subject:  Re: DSM parts FS

Bump! Adapter sold and the bov is pending.

Author:  Twenty5psi [ Fri Dec 26, 2008 10:11 pm ]
Post subject:  Re: DSM parts FS

Bump.

Author:  sketzshane [ Sat Dec 27, 2008 3:03 pm ]
Post subject:  Re: DSM parts FS

Quote:
Someone can use these parts! I have pics of everything guys!
What is the rollcage made from (Chromeoly/Mild Steel/Black Iron)? Please send me pics of the Rollcage. Thanks in Advance

Author:  Twenty5psi [ Sat Dec 27, 2008 9:35 pm ]
Post subject:  Re: DSM parts FS

Just sold and delivered the roll cage tonight.

Rollcage, 17's sold.

Author:  Twenty5psi [ Tue Dec 30, 2008 9:35 pm ]
Post subject:  Re: DSM parts FS

Bump for sold cage, 17's, cas, bov, speed sensor and adapter. Make offers guys!

Page 1 of 2 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/