4g61t.org

Okay, I'm hoping that the time might be right this time. I am again gauging interest in a replica mid-wing for the CSM. I still have an original 1-piece FOHA mid-wing for the '89-92 CSM hatch that was donated by coltanostra from Germany. This is not the 3-piece factory Cyborg wing. As before the mid-wings will be replicas available in either Carbon Fiber or Fiberglass. Manufacturing will be handled by RRE's Carbon Trix. Prices are as follows.
Carbon Fiber - $295 US
Fiberglass - $225 US
Shipping will be $35 and $30 respectively within the 48 states. Our neighbors to the north and Hawai'i will be $10 more.

Production will take only one month from the time the order is placed if we can make it happen this time. Please reply if you are serious and can purchase one within the next couple of months. Last survey I did there were 29 people that said they were interested. I need just 8 of you to be serious buyers right now, since Bill Spruill and HondaHunter are already included. Below is a pic of the wing installed. It will require drilling 4 holes into your hatch.

_________________
Jason Veraldi
Scammer
http://www.4g61t.org/forum/viewtopic.php?f=3&t=34532

ahh fcuk it, i'm in for a fiberglass one

_________________
01 Maxima VQ30DE
92 Summit 4g63t (Traded to Evo... R.I.P.)

What about cyborg side skirts?

_________________
89 Mighty Max 2.6. Lookin for side drafts 89 Colt turbo. SOLD
91 Galant GSX, waiting for 2.4

How about one project at a time.

_________________
Jason Veraldi
Scammer
http://www.4g61t.org/forum/viewtopic.php?f=3&t=34532

You know me. All paid up. What about those strut tower bars? (These are not a new project. )

_________________
Age is a number; attitude counts.

Okay, seriously...where did all of you go that wanted this so bad?

_________________
Jason Veraldi
Scammer
http://www.4g61t.org/forum/viewtopic.php?f=3&t=34532

Okay, if the interest for the mid-wing is gone, what would you guys like to see in Carbon Fiber or Fiberglass?

_________________
Jason Veraldi
Scammer
http://www.4g61t.org/forum/viewtopic.php?f=3&t=34532

I think someone needs to make a sick ass body kit for our csm's Tom never wrote me back.... we NEED and agressive front bumper cover

if anything i say we go with the FOHA rear bumper and sideskirts like the blue Colt in jasons post.....thats a sweet kit and i like the vents in the bumper!

I'm in the process of fitting Talon skirts, it requires abit of cutting but i think it will look amazing. I'm only doing the skirt, not the door skirt panel.

_________________
92' Dodge Colt 200GT - 4G63T - Taking Offers.

i wouldnt really call the Cyborg sideskirts 'really cool' or anything.
most people dont actually notice the ones on my Cyborg.
the sideskirts from C83A Hatches (the 4WD ones) are cool though

_________________
1990 C83A 4WD 4G63T powered hatch - [PSIBRG]
1992 JZX91 2JZ powered Toyota Mark II

Back from the dead? For starters this would not be a group buy. If enough people simply say they want them I can have them produced up front, no deposits. Right now would probably be fiberglass only, but for cheaper than before. Would help me pay people back quicker too or people can take them as repayment. Can't find a stock photo off hand so I'll post one when I take it out of storage tomorrow.

_________________
Jason Veraldi
Scammer
http://www.4g61t.org/forum/viewtopic.php?f=3&t=34532

bump my last reply.

_________________
Age is a number; attitude counts.

I'm in

_________________
89 Mirage Turbo-Money pit
99 Jeep Cherokee-1/4 Epic
01 Cobra-Too Thirsty
72 Dodge-Pedo'van