4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 4:24 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 34 posts ]  Go to page 1 2 3 Next
Author Message
 Post subject: 1.8L TB Upgrade
PostPosted: Sun Dec 29, 2002 8:17 pm 
Offline
CSM Expert
User avatar

Joined: Mon Mar 04, 2002 7:00 pm
Posts: 2952
Location: Waterloo, ON Canada
I decided I needed some better throttle response on the 4g15 until I can get through my next emission check then comes the 4g63t. So I decided to start by upgrading the throttle body I used a TB from a 93 Eagle Talon DL 1.8L. My stock colt unit unit had a stock bore of 46mm the replacement talon TB had a bore of 50mm (Looked bigger but I did not measure it). All the sensors where interchangeable with the 4g15. I got the TB cleaned it up and installed it. AND IT RAN LIKE TOTAL CRAP! It idled high. If I put the pedal to the mat I would get up to about 50km/h at thats it. The tranny wasn't shifting right (Auto). So after contemplating everything with Drcolt we decided it sounded like a throttle cable with improper tension. I went back down and looked at it and relized what the problem was there was another cable that wasn't hooked up. (I assume this gets interfaced with the TCU or tranny somehow) Unfortunatley the new TB didn't have this arm attached to it DOH! so I did surgery on the 2 TBs and swapped the arm on the new TB hooked up the mystery cable and went for a drive its a whole different car it has a much smaller dead spot in the RPM range. All in all a very good upgrade for all you 4g15 guys I highly recommend doing this. I haven't even port matched the Intake manifold yet and its even better.


Top
   
 Post subject:
PostPosted: Tue Dec 31, 2002 6:20 pm 
Offline
CSM Expert
User avatar

Joined: Mon Mar 04, 2002 7:00 pm
Posts: 2952
Location: Waterloo, ON Canada
**UPDATE**

Now that I've been running around with the mod the more fun this car is it almost feels like VTEC once I hit about 2600 to about 5500 the car pulls surprisingly hard for a little 1.5L especially auto. I'm thinking an adjustable cam gear from RPW is in order to shift some power down from the top end to the bottom end. But to all the 1.5L guys get this mod. It takes and hour and next to no skill to put on like really if you can turn a rachet you can put this on and probably only cost about $50 for the TB from a local wrecker. Easily the best money I've ever spent on this car. I get to see later this week how the GCs feel on the car I'll keep you posted.

Happy New Year Everyone..

Tim


Top
   
 Post subject:
PostPosted: Sun Apr 06, 2003 5:27 pm 
Offline
Restricted Newbie

Joined: Sat Mar 15, 2003 3:27 pm
Posts: 16
Location: Va Beach VA
so its a 1.8l talon tb. well if you have a m/t car we should not have the tcu cable???? well i will try getting this mod done.


Top
   
 Post subject:
PostPosted: Sun Apr 06, 2003 7:42 pm 
Offline
CSM Expert
User avatar

Joined: Mon Mar 04, 2002 7:00 pm
Posts: 2952
Location: Waterloo, ON Canada
Schooled1:

No M/T cars don't have TCU's You are the TCU on a M/T car...


Top
   
 Post subject:
PostPosted: Wed Apr 16, 2003 11:15 pm 
Offline
4g61t Delinquent
User avatar

Joined: Wed Dec 25, 2002 7:44 pm
Posts: 1740
Location: Hesperia, CA(In the Mojave desert)
good job berserko...imma gonna try this mod since me and my old man are going to another junkyard tomorrow....BTW.....anyone know whats so special about a DSM 1.8L Cyclone engine?....its priced for $400USD at the yard i went to today.


oh hey can you post a pic of the linkages and such of what you changed for reference?

_________________
I own a CSM.
I live my life 1 repair at a time.
Nothing matters...not my crew...my bills, nor my friends drama...
For those 10 months or less... I'm broke...


Top
   
 Post subject:
PostPosted: Wed Apr 16, 2003 11:22 pm 
Offline
CSM Expert
User avatar

Joined: Mon Mar 04, 2002 7:00 pm
Posts: 2952
Location: Waterloo, ON Canada
No idea on the motor and yeah you can get a TB for next to nothing and if you wree to buy a "ported" one from RPW their like $180 so this is a big savings.. this and a cam and a lightened flywheel would make this car much more fun to drive...


Top
   
 Post subject:
PostPosted: Sat May 24, 2003 9:26 am 
Offline
CSM Expert
User avatar

Joined: Mon Jul 22, 2002 8:58 pm
Posts: 1187
Location: KCMO
i believe that the cyclone was jap spec. Ive only seen one. I think the runners are designed a little differently.

_________________
http://members.cardomain.com/socrateez
04' Olds Alero
91' Colt GL hatchback
4g15 12valve 5spd.
4g37 TB, MAF & Injectors. 4g37 ECU
Ported & polished & custom CAI w/K&N filter
5* Cam retard, 7*Ignition advance
2-1/4" catback w/flowmaster muffler
89 GT brake and suspension swap
Lots of little s#@t


Top
   
 Post subject:
PostPosted: Sat May 24, 2003 12:08 pm 
Offline
Some call me a god

Joined: Thu Oct 24, 2002 9:28 pm
Posts: 1665
Location: mississauga, Ontario
cyclone engine have more runner, that engage at a higher RPM. Some say its a complete waste of money.


Top
   
 Post subject:
PostPosted: Sat May 24, 2003 12:57 pm 
Offline
CSM Expert
User avatar

Joined: Mon Jul 22, 2002 8:58 pm
Posts: 1187
Location: KCMO
Ive heard also that power gains are negligable. Cool cyclone emblem on intake is good for 300HP on couch models :lol:

_________________
http://members.cardomain.com/socrateez
04' Olds Alero
91' Colt GL hatchback
4g15 12valve 5spd.
4g37 TB, MAF & Injectors. 4g37 ECU
Ported & polished & custom CAI w/K&N filter
5* Cam retard, 7*Ignition advance
2-1/4" catback w/flowmaster muffler
89 GT brake and suspension swap
Lots of little s#@t


Top
   
 Post subject:
PostPosted: Thu Jul 24, 2003 7:00 am 
Offline
4g61t Delinquent
User avatar

Joined: Wed Dec 25, 2002 7:44 pm
Posts: 1740
Location: Hesperia, CA(In the Mojave desert)
hey tim....do you got the 12v head or the 8v head because i have the 8v head and went to the wreckers yesterday and did a comparison of the TB bolt patterns...and the 1.8 TB is about 3/8" wider i have the TB gaskets infront of me and im totally stumped :-?

_________________
I own a CSM.
I live my life 1 repair at a time.
Nothing matters...not my crew...my bills, nor my friends drama...
For those 10 months or less... I'm broke...


Top
   
 Post subject:
PostPosted: Thu Jul 24, 2003 12:17 pm 
Offline
Some call me a god

Joined: Thu Oct 24, 2002 9:28 pm
Posts: 1665
Location: mississauga, Ontario
tim has the 12v head...
i want to put a stealth TT throttle body on my 4g61t... then port matcht he intake mani..

_________________
92' Dodge Colt 200GT - 4G63T - Taking Offers.


Top
   
 Post subject:
PostPosted: Thu Jul 24, 2003 12:50 pm 
Offline
CSM Expert
User avatar

Joined: Mon Mar 04, 2002 7:00 pm
Posts: 2952
Location: Waterloo, ON Canada
Ya I gots the 12v


Top
   
 Post subject:
PostPosted: Thu Jul 24, 2003 3:15 pm 
Offline
4g61t Delinquent
User avatar

Joined: Wed Dec 25, 2002 7:44 pm
Posts: 1740
Location: Hesperia, CA(In the Mojave desert)
k...coz i was like WTF...then it clicked that the 12v and 8v TB have diff bolt patterns......also could i get away with swapping 12v upper intake manifold and bolting it onto the 8v head? so i cant do the 1.8 tb.....or do i need to do the whole conversion?

_________________
I own a CSM.
I live my life 1 repair at a time.
Nothing matters...not my crew...my bills, nor my friends drama...
For those 10 months or less... I'm broke...


Top
   
 Post subject:
PostPosted: Thu Jul 24, 2003 3:28 pm 
Offline
CSM Junkie
User avatar

Joined: Sat Mar 29, 2003 2:07 am
Posts: 614
Location: Murray, UT
paul i can get you a cyclone for CHEAP!!! let me know and i will call my boys for ya

_________________
1983 Honda VF750F
1986 Chevrolet C-10 305
1990 Eagle Summit ES 4g63na 5spd
1990 Chevrolet Corvette L98
1996 GMC Suburban 454
1999 Volvo S70 AWD L.P.T


Top
   
 Post subject:
PostPosted: Thu Jul 24, 2003 3:57 pm 
Offline
4g61t Delinquent
User avatar

Joined: Wed Dec 25, 2002 7:44 pm
Posts: 1740
Location: Hesperia, CA(In the Mojave desert)
are they selling it for 40 bux????

_________________
I own a CSM.
I live my life 1 repair at a time.
Nothing matters...not my crew...my bills, nor my friends drama...
For those 10 months or less... I'm broke...


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 34 posts ]  Go to page 1 2 3 Next

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited