| 4g61t.org http://4g61t.org/forum/ |
|
| look at this pic... http://4g61t.org/forum/viewtopic.php?f=26&t=5478 |
Page 1 of 1 |
| Author: | crazyguy [ Sun Sep 28, 2003 9:01 pm ] |
| Post subject: | look at this pic... |
and tell me if theres suppose to be a bolt plugging this hole on my tranny. this is looking straight down on the passenger side of my tranny http://members.shaw.ca/cjdc/pics/92colt ... ISSING.JPG |
|
| Author: | 89 mirage evo [ Sun Sep 28, 2003 9:04 pm ] |
| Post subject: | |
umm no. why? because it doesnt go inside the tranny. |
|
| Author: | homer simpson [ Sun Sep 28, 2003 9:58 pm ] |
| Post subject: | |
nope, a bolt doesn't go there, but a little black rubber breather is suppoused to be there. You're probably ok w/o it though. |
|
| Author: | crazyguy [ Sun Sep 28, 2003 10:47 pm ] |
| Post subject: | |
ok, just look like a way for crap to get in the tranny. tranny oil and diff oil is all one correct? cause when I pulled the drain bolt thats below the passenger side axle then filled it up through a bolt hole at the front of the tranny(thats I sorda remembered as the fill bolt from a '91 colt I had a couple years ago) it shifted worse than before I changed it, I think I need lighter oil, book said run GL-4 or better so I picked up some 80-90 that said it works for where GL-4 or 5 is called for. hmmm, have to deal with it once its actually on the road, temp permit ran out so gotta wait for truck to sell. |
|
| Author: | The Ethereal [ Mon Sep 29, 2003 6:21 am ] |
| Post subject: | |
Never EVER use any GL-5 oil on Mitsu trannys. It will eat the syncros. 80-90 is a heavy oil. It works, but shifting is a nightmare when it's cold outside. A lot of people said Castrol VMX80 is great, but I don't know (and couldn't find out) wether it's GL-5 or GL-4. Does anyone know? |
|
| Author: | Tuan Nguyen [ Mon Sep 29, 2003 8:12 am ] |
| Post subject: | |
I use half Redline MT90 and half MTL in both of my cars. VFAQ has a lot of good info on fluids. -Tuan- '89 Colt GT Turbo '91 GVR-4 #1421 |
|
| Author: | crazyguy [ Mon Sep 29, 2003 8:20 am ] |
| Post subject: | |
hrmm I have no idea what those oils are |
|
| Author: | Guest [ Mon Sep 29, 2003 8:38 am ] |
| Post subject: | |
Just for future reference, try to make the title a little more clear about the subject of the post. If someone searches for transmission and this title pops up, they most likely are not going to look at it. |
|
| Author: | kjmerkel69 [ Mon Sep 29, 2003 7:00 pm ] |
| Post subject: | |
I use BG SynchroShift and it seems to work well. In addition, it has virtually no odor. |
|
| Author: | Colt4T5 [ Mon Sep 29, 2003 7:09 pm ] |
| Post subject: | |
BG Synchroshift or GM Synchromesh is the ONLY thing to put in a DSM tranny. I have tried 4 or 5 others, and none of them even come CLOSE to these. The entire DSMHawaii car club SWEARS by these products. -Kev |
|
| Author: | crazyguy [ Mon Sep 29, 2003 10:37 pm ] |
| Post subject: | |
Quote: Just for future reference, try to make the title a little more clear about the subject of the post.
yah I know, I wasn't intending to switch topics but it kinda happened, maybe I should create a tranny oil thread?
If someone searches for transmission and this title pops up, they most likely are not going to look at it. |
|
| Author: | 89 mirage evo [ Tue Sep 30, 2003 1:18 am ] |
| Post subject: | |
Quote: nope, a bolt doesn't go there, but a little black rubber breather is suppoused to be there. You're probably ok w/o it though.
oh yeah i forgot about that little sucker. i retract my prevous statement. you do need that breather tho. it keeps water and dirt out.
|
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|
