I know he said Individual Throttle body, and Thanks. Guess I could google a translator, but im too lazy.
| 4g61t.org http://4g61t.org/forum/ |
|
| Individual throtle body http://4g61t.org/forum/viewtopic.php?f=26&t=40641 |
Page 1 of 1 |
| Author: | milcasten [ Sat Apr 30, 2016 11:56 pm ] |
| Post subject: | Individual throtle body |
cual ITB debo comprar para un motor 4g63 1g??? gracias |
|
| Author: | fastvtgsx [ Sun May 01, 2016 2:22 pm ] |
| Post subject: | Re: Individual throtle body |
I highly doubt anyone that frequently uses this forum speaks and reads fluent Spanish. |
|
| Author: | Natedog [ Sun May 01, 2016 5:12 pm ] |
| Post subject: | Re: Individual throtle body |
I know he said Individual Throttle body, and Thanks. Guess I could google a translator, but im too lazy.
|
|
| Author: | milcasten [ Sun May 01, 2016 6:37 pm ] |
| Post subject: | Re: Individual throtle body |
Where do I buy a 1g 4G63 engine itb ? 
|
|
| Author: | Natedog [ Sun May 01, 2016 7:56 pm ] |
| Post subject: | Re: Individual throtle body |
I don't know of any that are available in the market. Most people fab them custom using motorcycle carbs. |
|
| Author: | Keane [ Sun May 01, 2016 10:15 pm ] |
| Post subject: | Re: Individual throtle body |
My personal opinion.... i think a fair amount of folks are spanish speakers which is great but regarding itb's i think natedog is right. Most people adapt sportbike carbs and use some sort of programmable fuel injection system. Why not just go turbo and foget about itbs? Way way more power to be had and an easier path to follow |
|
| Author: | lancerman [ Sun May 01, 2016 10:59 pm ] |
| Post subject: | Re: Individual throtle body |
I believe he may be referring to using ITB on turbo 4g63. there is manifold "jenvy" that is made for evo 4-9 cars. it would cost about 3000 to get one here in USA. the lucky few that own them so they are worth every penny. they give the engine a whole new perspective of what throttle response is on a turbo car. I looked at adapting the ebay ITB for honda cars. its do-able. just not sure it would be worth the effort. |
|
| Author: | xxNocturnalxx [ Mon May 02, 2016 8:42 am ] |
| Post subject: | Re: Individual throtle body |
I don't think itbs will be very beneficial. Wasn't there a member a while back selling some adapted itb kit? |
|
| Author: | milcasten [ Mon May 02, 2016 12:12 pm ] |
| Post subject: | Re: Individual throtle body |
my proyect is a 4g63 hi compression 11.1 with itb plus mega squirt, the problem is where buy a itb?? |
|
| Author: | acrazyjohnny [ Thu May 05, 2016 9:11 pm ] |
| Post subject: | Re: Individual throtle body |
No puedes comprarlo. Tines que aserlo.muchos usan itb de motora pero tienes que aser el intake. |
|
| Author: | xxNocturnalxx [ Fri May 06, 2016 9:21 am ] |
| Post subject: | Re: Individual throtle body |
I think a member got a Honda B18 intake manifold to work on his 4g63 without too much effort. The B18 ITBs don't look to be too far off from the 4g63 bolt pattern. Look into doing something like this http://www.ebay.com/itm/OBX-ITB-Individ ... C9&vxp=mtr You can also get a intake manifold weld flange and use that or make it into an adapter plate for an ITB setup. 
|
|
| Author: | Shawn J [ Tue May 10, 2016 6:28 pm ] |
| Post subject: | Re: Individual throtle body |
I have an ITB setup on my Talon. I put it on way back in 2005 but the kids got older and life got in the way. I still have it a it's 80% done but the car hasn't run since July of 2005. 
|
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|