4g61t.org http://4g61t.org/forum/ |
|
water pumps http://4g61t.org/forum/viewtopic.php?f=26&t=37699 |
Page 1 of 1 |
Author: | turbo_l200 [ Mon Apr 15, 2013 4:12 am ] |
Post subject: | water pumps |
hey iv been doin some reading into what i can swap from a 4g63 to my 4g61, and iv seen that the water pumps are not a few times, why is this, is it just outlets are diffrent, as my motor is geting turned around and il be using a water pump from a rwd 4g63, i can see why the bolt paturn would of changed |
Author: | Broke4speed [ Mon Apr 15, 2013 7:42 am ] |
Post subject: | Re: water pumps |
Due to the slightly shorter deck height of the 61, the 63 water pumps actually don't have the same bolt pattern. I just went through this with mine. BNIB 63 pump wouldn't fit at all. I compared the two gaskets and there's a definite difference. |
Author: | 92colt200e [ Mon Apr 15, 2013 7:58 am ] |
Post subject: | Re: water pumps |
I've also been through this with 61t vs 63t. Also I now have a 1G 7 bolt block in my 97 talon and the water pump from the 1G vs 2G is also different. I now need to source one for the colt for the Hyundai 2.4 block, im not sure if that one is same as any others. |
Author: | turbo_l200 [ Mon Apr 15, 2013 3:26 pm ] |
Post subject: | Re: water pumps |
oh realy that might make things a litttle hard, i need a rwd one, i take it the 4g61 only come in fwd setup |
Author: | Flying Eagle [ Mon Apr 15, 2013 9:30 pm ] |
Post subject: | Re: water pumps |
As far as we know, yes the 4g61 was only in a FWD setup/AWD setup, not setup inline for RWD like the trucks and early car models would have been. |
Author: | turbo_l200 [ Tue Apr 16, 2013 2:37 am ] |
Post subject: | Re: water pumps |
oh realy that could make things a little harder for me, hmmmm has any one got a few pics of the water pump for a 4g61, im now thinking that i might be able to block the rear opening off and tap out the blanking plug, so i can put my hose in ? |
Author: | turbo_l200 [ Tue Apr 16, 2013 4:20 am ] |
Post subject: | Re: water pumps |
after looking at 4g61 bits on ebay, i found this water pump http://www.ebay.com.au/itm/1982-1994-Ch ... 3f208844d8 says its for a 3g37 and a g32b and g32bt and a 4g61 so if the one pump fits them, im thinkin that a galant water pump may bolt up to it |
Page 1 of 1 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |